IPC Designers Council Cascade Chapter Meeting Sept. 26


Reading time ( words)

The IPC Designers Council Cascade (Seattle) Chapter is holding a Lunch ‘n’ Learn session on Wednesday, September 26.

Speaker Dock Brown, CRE, co-chair of the IPC DFX Committee, will present "Achieving Cleanliness for High Reliability Boards." This presentation provides a longitudinal view of board cleanliness issues. These problems are not new and in fact have plagued the industry for decades. Given increased needs for signal fidelity, tighter spacings, more active flux formulations, and a proliferating supply chain, this means process residues must be fully removed or, if left in place, rendered benign. Join Dock for a perspective of the past, present, and future of these issues.

Dock brings his more than 30 years of electronics reliability experience to clients of DfR Solutions. He won the best paper award at the 2018 Pan Pacific Microelectronics conference and is currently co-chair of the IPC DFX Committee.

The cost for this event is $20 and includes lunch. Reservations are required. 

Location
Lake Washington Institute of Technology - Kirkland Campus 

Time
11:30 am-1:30 pm

To register, visit http://cascade-ipcdc.org

Share

Print


Suggested Items

Chris Hanson: New Ventec IMS Dielectrics Rated for Higher Temps

07/07/2020 | Andy Shaughnessy, Design007 Magazine
Andy Shaughnessy recently spoke with Chris Hanson, global head of IMS Technology for Ventec International Group. During their conversation, Chris discusses his group’s recent efforts to create new IMS materials, with a focus on dielectrics. As Chris explains, Ventec has developed several new dielectrics that can withstand much higher operating temperatures, one of which is UL-rated for a maximum operating temp of 155°C, which may be the highest for an IMS dielectric.

Just Ask Happy: PCB Design For EE Undergrads?

07/02/2020 | I-Connect007 Editorial Team
We asked for you to send in your questions for Happy Holden, and you took us up on it! The questions you've posed run the gamut, covering technology, the worldwide fab market, and everything in between. Enjoy.

PCB Builder from Digi-Key Lets Customers Order Directly From Board Shops

06/04/2020 | Andy Shaughnessy, Design007
On June 2, components distributor Digi-Key Electronics announced the release of PCB Builder, a tool that lets customers have PCBs shipped directly from the fabricator. PCB Builder also allows customers to perform file layer checks and receive instant quotes from multiple fabricators. Andy Shaughnessy spoke with Josh Mickolio, supplier business development manager for Digi-Key, about the development of PCB Builder and what this tool means to PCB designers and design engineers.



Copyright © 2020 I-Connect007. All rights reserved.