Datest Receives AS9100D Certification


Reading time ( words)

Datest has earned its AS9100D certification. With this milestone, together with the ISO 9001:2015 certification, Datest maintains the appropriate, consensus-driven quality benchmarks to serve the aviation, space and defense industries.

AS9100 is an aerospace standard based on the ISO 9001 quality system requirements, adding more stringent requirements specific to the aviation, space and defense industry. The standard takes the requirements of ISO 9001 and supplements them with additional quality system requirements, which are established by the aerospace industry to satisfy DOD, NASA and FAA quality requirements. The intent of the standard is to establish a single quality management system for use within the aerospace industry. The new AS9100D revision to the standard adds additional requirements addressing detailed process descriptions and the risks and opportunities associated with their operation; outside interested third party influences; human factors; and professional ethics.

"Conformity and certification to the AS9100D version of the standard is the price of entry to the aerospace market in these challenging times. Datest welcomes the challenge and the responsibility inherent in operating its quality management system in a demonstrably consistent, thorough and ethical manner. To have earned recognition as doing so by an unbiased third party is an honor and a privilege that we do not take for granted," says Datest President Robert Boguski.

Datest provides advanced test engineering and inspection services to the CM/EMS and OEM communities, and many other industries. The team prides itself on their speed and flexibility in providing the best solution to each customer’s unique testing needs.

With more than 34 years of expertise, Datest offers in-circuit testing (ICT), flying probe testing, X-ray inspection, boundary scan/JTAG testing, functional testing, failure analysis and other related services. Datest is an ISO 9001- and AS9100D-certified company, and a member of IPC, SMTA, EIPC, IEEE and ASNT.

About Datest

Datest is the preeminent provider of advanced, efficient, and cost-effective PCBA testing, test engineering, failure analysis and analytical solutions. Established in 1984, Datest now offers in-circuit and flying probe testing and development services; DFT/DFM analysis; JTAG/Boundary Scan development services; AXI as well as 2D and 3D X-ray and CT-scan capabilities for nondestructive failure analysis, root cause identification, and dispute resolution. The company also offers cross-sectioning, dye & pry, and analytical laboratory services, including SEM and C-SAM analysis; counterfeit component identification and detection; and reverse engineering services.  Datest is proud to introduce its new 225kV microfocus CT system from VJ Technologies, offering CT scanning and failure analysis services for all manner of larger objects besides printed circuit board assemblies. Datest is ITAR registered and has a quality management system (QMS) that is certified to ISO9001 and AS9100D. We have transitioned our QMS to AS9100D in 2018. For more information, click here.  

Share

Print


Suggested Items

Top 10 Most-Read SMT Articles of 2020

12/31/2020 | I-Connect007
As 2020 comes to a close, the I-Connect007 Editorial Team takes a look back at its most read articles. Here are the top 10 reads in SMT from the past year.

Meet Christine Davis, I-Connect007 Columnist

12/23/2020 | I-Connect007 Editorial Team
Meet Christine Davis, one of our newest columnists! Christine will share her expertise and lessons learned through her journey as one of the few women in the electronics industry to found and run her own company.

Book Excerpt: The Printed Circuit Assembler’s Guide to Smart Data

12/16/2020 | Sagi Reuven and Zac Elliott, Siemens Digital Industries Software
Whenever we discuss data, keep in mind that people have been collecting data, verifying it, and translating it into reports for a long time. And if data is collected and processes are changed automatically, people still will be interpreting and verifying the accuracy of the data, creating reports, making recommendations, solving problems, tweaking, improving, and innovating. Whatever data collection system is used, any effort to digitalize needs to engage and empower the production team at the factory. Their role is to attend to the manufacturing process but also to act as the front line of communications and control.



Copyright © 2021 I-Connect007. All rights reserved.