SEHO to Exhibit Entry-Level Selective Soldering System at SMTAI


Reading time ( words)

SEHO Systems GmbH announced plans to exhibit at SMTA International, scheduled to take place October 16-17, 2018 in Rosemont, Illlinois. The company will introduce the new StartSelective—the perfect plug-and-produce selective soldering system for those just entering into automated soldering in Booth #423.

The StartSelective is designed for maximum efficiency. Programming is 100 percent offline at any PC workplace so that the machine is always available for production. Loading and unloading of assemblies is done from the front side, and all setup, retooling and maintenance are easily accessible on one side of the machine. This design allows users to integrate the StartSelective in any production island with minimum footprint requirements, or to place it as stand-alone system in the corner of the production floor.

Connect, power on and produce. The StartSelective is thought through down to the last detail, from its compact design, ease of operation and many technical highlights. With a footprint of only 2.5 m², the StartSelective provides maximum quality and reproducibility of soldering results for assemblies up to 20“ x 20“ and an outstanding return on investment.

The preheat section of the StartSelective is equipped with pulsar heaters over the full area that feature a high energy density and quick reaction time. This enables a remarkable reduction in energy consumption, especially in standby mode. A top-side heater allows processing of high-mass assemblies, and can be activated individually with a pre-programmed temperature.

Another highlight is the optimized soldering area with non-wetted miniwave solder nozzles, featuring a 7° soldering angle. The nozzles convince with stable and reproducible flow properties resulting in outstanding soldering quality. Even difficult geometries can be soldered easily. Moreover, non-wetted solder nozzles are maintenance-free and feature a nearly unlimited lifetime, thus avoiding follow-up costs. Additionally, they do not require any chemicals for activation.

Just like the high volume selective soldering systems from SEHO, the StartSelective is equipped with a complete package for automated process control. The spray jet control in the fluxing area, automatic wave height control and solder level monitoring with automated solder wire supply are only some of the monitoring functions.

For further information, please visit SEHO at SMTA International in booth #423 or online.

Share

Print


Suggested Items

Catching up With Darrel Yarbrough of YES

05/07/2019 | Dan Beaulieu, D.B. Management Group
Yarbrough Electronic Sales (YES) is one of the fastest growing contract manufacturers in the Southwest. As people get to know them better, they are becoming the go-to company in their area. In this interview, long-time industry veteran Darrel Yarbrough, owner of YES, provides a background about the company, its capabilities, and his outlook for the industry.

IPC Asia President Phil Carmichael on China Trends

05/01/2019 | Barry Matties, I-Connect007
At the productronica China 2019 show in Shanghai, Barry Matties joined Phil Carmichael, president of IPC Asia, to discuss the continued growth of IPC in Asia, including the increasing emphasis on training. IPC China has grown from hosting two technical conferences five years ago to 32 in the past year. Phil also addresses current trends he’s seeing as well as trade tensions between China and the U.S.

Tips & Tricks: Water Contamination and Flux Expiry

04/17/2019 | Jason Fullerton, MacDermid Alpha Electronics Solutions
Solder joints that form properly are not expected to exhibit reduced reliability. However, a higher number of defects created tends to lead to a higher chance that defective connections escape detection through inspection and functional testing, and that’s not a risk to be taken lightly.



Copyright © 2019 I-Connect007. All rights reserved.