Nordson ASYMTEK Presents Ways to Optimize Conformal Coating, Dispensing Processes


Reading time ( words)

Nordson ASYMTEK, a Nordson company will present ways to optimize the conformal coating and dispensing processes at SMTA International 2018. The company will be in Booth 311.

Featured at SMTAI will be the Select Coat SL-940 system along with the FX-940UV Series Optical Inspection system. When the SL-940 is combined with the FX-940UV and ASYMTEK’s curing ovens, the result is an optimized conformal coating line that delivers high quality and productivity for automated coating processes.

“The conformal coating industry has grown significantly over the past few years. Managing the many coating materials from silicones to acrylics is a challenge because each one may behave differently,” explained Jerry Frost, regional sales manager for Nordson ASYMTEK. “Our experts can help you set profiles and determine the optimal process for your conformal coating application.”

Dispensing and jetting experts will also be available to discuss ways to optimize the automated fluid dispensing process.

“In electronics assembly, dispense weights have decreased and applications have a narrower process window, requiring reliable, high-quality dispensing results. To meet these high standards, process variation must be actively monitored and addressed,” stated Sonia Aldridge, senior product application engineer for Nordson ASYMTEK. “We solved this problem 20 years ago with Automated Self-Calibration and Calibrated Process Jetting. Now, with our IntelliJet Jetting System, controlled through ASYMTEK’s Fluidmove software, the system adjusts process variation to give consistent jetting quality. One customer has dispensed well over 4 billion jet cycles without requiring service, recalibration, or replacement.”

See the Nordson ASYMTEK systems at SMTA International, October 16-17, 2018 at the Donald Stephens Convention Center, Rosemont, Illinois. And come celebrate at SMTA International’s Fiesta, sponsored by Nordson ASYMTEK, and try our OPTIMIZER Margarita to be ¡Livin’ la Vida!

Share


Suggested Items

ASM Assembly Solutions on CFX

07/16/2018 | Barry Matties, I-Connect007
ASM Assembly Solutions was one of the 30+ companies participating in IPC's CFX (Connected Factory Exchange) showcase at the recent SMT Hybrid Packaging show in Nuremberg, Germany. In this interview, ASM's Thomas Marktscheffel shared his perspective on CFX and its current challenges, and dispelled the notion that CFX might be a cookie-cutter approach to the smart factory.

Optimal Electronics Sets Sight on Growth

11/14/2017 | Stephen Las Marias, I-Connect007
In an interview with SMT Magazine, Dr. Ranko Vujosevic, CEO and CTO of Optimal Electronics, speaks about the latest technology developments at his company, and his plans to sustain growth. He also talks about his paper on lights-out electronics assembly, the technologies that would support this vision, and the ultimate goal of Industry 4.0.

Koh Young Discusses Latest 3D AOI Innovations

06/16/2017 | Stephen Las Marias, I-Connect007
Koh Young Technology's Scott Kim, overseas sales team manager, talks about the latest challenges and developments happening in inspection technologies, the new demands and requirements from customers, as well as the key factors to consider when it comes to buying inspection systems.



Copyright © 2018 I-Connect007. All rights reserved.