Heraeus Develops Thick Film Gold Conductor Paste


Reading time ( words)

Heraeus Electronics has developed a new thick film gold conductor paste that avoids lead and cadmium. Specially matched ingredients also ensure a denser fired film and excellent bond strength with the ability for etching.

The new thick film gold conductor paste can be used for high-reliability applications such as medical devices as well as high-frequency circuits for communications. Those applications require high performance at high and low temperatures, in chemically aggressive environments, or extremely humid conditions. The paste performs well on dielectrics and on oxide substrate compositions even when multiple firing steps are required.

For the paste, specially matched ingredients are used. First, the specific gold powder ensures a higher and tighter bond distribution. Second, a new vehicle formation that ensures maximum densification. Third, a special material combination achieves an excellent bond strength when etched on aluminum oxide. Regulations in the electronics industry have called for the elimination of hazardous substances in thick film pastes for quite some time, but exemptions are in place for critical applications. These exemptions are expected to expire in the next few years.

"Demands for dense, defect-free, etchable gold films that deliver equivalent or improved performance to their lead containing counterparts have been increasing dramatically," says Dean Buzby, Global Product Manager Thick Film at Heraeus Electronics. The developments will be presented at the 51th International Symposium on Microelectronics on IMAPS 2018 in Pasadena. Continuing trends towards circuit miniaturization and higher packaging density result in greater complexity. Therefore, the thick film gold properties become increasingly critical.

The new thick film paste from Heraeus Electronics can screen print and resolve fine features down to 100 micron-size lines and spaces. The paste also has the ability to be etched using methods like photolithography processes. This results in even higher density circuit designs down to 25-50 micron-size lines and spaces. Wirebond adhesion of both thin gold and aluminum wire is excellent when fired directly onto ceramic as well as on dielectrics.

About Heraeus

A globally leading technology group, Heraeus is headquartered in Hanau, Germany. Founded in 1851, it is a family-owned portfolio company which traces its roots back to a pharmacy opened by the family in 1660. Today, Heraeus combines businesses in the environmental, energy, electronics, health, mobility and industrial applications sectors. In the 2017 financial year, Heraeus generated revenues of €21.8 billion. With approximately 13.000 employees in 40 countries, the FORTUNE Global 500-listed company holds a leading position in its global markets. Heraeus is one of the top 10 family-owned companies in Germany. With technical expertise, a commitment to excellence, a focus on innovation and entrepreneurial leadership, we are constantly striving to improve our performance. We create high-quality solutions for our clients and strengthen their long-term competitiveness by combining unique material expertise with leadership in technology.

Learn more about Heraeus Electronics on IMAPS 2018, click here.

Share


Suggested Items

Drying Boards after Rework Cleaning—To Do or Not to Do?

09/19/2017 | Bob Wettermann, BEST Inc.
In cases where water soluble fluxes are being used in the rework process, in cases where the components need to have flux residues washed off, or in cases where the board needs to be cleaned with water for subsequent conformal coating touchup, proper drying and perhaps even bake out procedures need to be performed.

2015’s Most Read SMT Articles

12/31/2015 | I-Connect007
Every year, we like to take a look back at the most popular SMT news and articles. These are the top 10 most-read SMT articles from the past year. Check them out.

Meeting High-Speed Demand with Optical Circuits

07/28/2015 | Barry Matties, I-Connect007
In an interview with I-Connect007 Publisher Barry Matties, Felix Betschon of vario-optics discusses the advancements in optical circuit boards, and explains the core advantage of this technology and what circuit designers must do to add optical circuits into their design disciplines. He also talks about the opportunities for this new technology, and what's driving customers to consider adopting it.



Copyright © 2018 I-Connect007. All rights reserved.