Viscom Will Exhibit S3088 Ultra Chrome at SMTA Guadalajara


Reading time ( words)

Viscom Inc. will exhibit at the SMTA Guadalajara Expo & Tech Forum, scheduled to take place November 14 - 15, 2018 at the Expo Guadalajara. The Viscom Americas team will highlight the S3088 ultra chrome, designed to meet the demand for high throughput production lines, inspect the most leading-edge electronics and be cost competitive.

Some of the market-leading features of the S3088 ultra chrome include inspection speed of up to 65 cm2/s and 65 mega pixels of information in each 50 mm x 50 mm field of view. The S3088 ultra chrome is based on Viscom’s unique 3D AOI technology, and combines accurate defect detection with high inspection speed.

The resolution is switchable, and with 10 µm per pixel even 03015 components can be reliably inspected. Together with the eight angled-view cameras, a virtually shadow-free 3D inspection is one of the key advantages of the system.

For optimal process control and comprehensive defect coverage, the results from automatic optical inspection can be intelligently linked with SPI, AXI and MXI results via the Quality Uplink software from Viscom. The modern user interface, vVision makes operation simple and inspection program generation intuitive and quick.

Along with the high-performance hardware, Viscom delivers exciting new software features that enable automatic 3D program generation utilizing an extensive IPC compliant library, Gerber and centroid data to create a precise and comprehensive 3D image. With the unique 360View capability, side views of electronic components can be rendered in True to Life images.

About Viscom

Viscom AG develops, manufactures and sells high-quality inspection systems. The portfolio encompasses the complete bandwidth of optical and X-ray inspections. In the area of assembly inspection for electronics manufacturing, the company is among the leading suppliers worldwide. Viscom systems can be configured specific to the customer and can be interlinked. The company headquarters and manufacturing location is in Hanover, Germany. With a wide network of branches, applications centers, service support points and representatives, Viscom is represented internationally. Founded in 1984, since 2006 Viscom has been listed on the Frankfurt Stock Exchange (ISIN: DE0007846867). For additional information, click here.

Share

Print


Suggested Items

Approaches to Overcome Nodules and Scratches on Wire-Bondable Plating on PCBs

07/17/2019 | Young K. Song and Vanja Bukva, Teledyne Dalsa Inc., and Ryan Wong, FTG Circuits
Initially adopted internal specifications for acceptance of printed circuit boards (PCBs) used for wire bonding was that there were no nodules or scratches allowed on the wirebond pads when inspected under 20X magnification. This paper details if wire bonding could be successfully performed over nodules and scratches and if there was a dimensional threshold where wire bonding could be successful.

Practical Implementation of Assembly Processes for Low Melting Point Solder Pastes (Part 1)

07/16/2019 | Adam Murling, Miloš Lazić, and Don Wood, Indium Corporation; and Martin Anselm, Rochester Institute of Technology
Since 2006 and the implementation of the RoHS directive, the interest in bismuth-tin solder alloys—whose melting point around 140°C is very desirable because it allows for the use of lower temperature laminate materials and reduces thermal stress on sensitive components—has only increased as the industry has searched for Pb-free alternatives to the chosen standard, SAC305, which melts at considerably higher temperatures than the incumbent tin-lead alloys.

Size Matters: The Effects of Solder Powder Size on Solder Paste Performance

07/08/2019 | Tony Lentz, FCT Assembly
Solder powder size is a popular topic in the electronics industry due to the continuing trend of miniaturization of electronics. And the question commonly asked is, "When should we switch from Type 3 to a smaller solder powder?" Read more to find out.



Copyright © 2019 I-Connect007. All rights reserved.