Seika to Demo McDry, Unitech, Sawa and MALCOM Equipment at SMTA Guadalajara


Reading time ( words)

Seika Machinery, Inc. plans to exhibit at the SMTA Guadalajara Expo & Tech Forum, scheduled to take place November 14-15, 2018 at the Expo Guadalajara. Seika will discuss the latest equipment from McDry, Unitech, Sawa and MALCOM.  

The SAWA Ultrasonic Squeegee Cleaner features easy operation, a synchronous ultrasonic effect, and is compatible with SAWA Fully Automatic. The X- and Y-axis of ultrasonic waves are synthesized in the 13-liter tank, working with the solvent to maximize cleaning ability. Sawa Handy Stencil Cleaners will be available at the show.

The new McDry DXU-1001A high performance dry cabinet offers fast dehumidification back to set point 2 to 3 times faster than former models and maintains one percent RH levels. All McDry ultra-low humidity storage cabinets conform to IPC/JEDEC J-STD 033D and IPC 1601 Standards. Additionally, the ESD safe design adheres to the IEC-61340-5-1 (ESD) Standard. McDry cabinets dehumidify ICs to prevent micro-cracking and are an alternative to baking, MBBs and nitrogen storage.

Seika also will highlight the UNITECH UC-250M-CV PCB Board Cleaner. The UC-250M-CV takes all the features of the UC-250M and adds a dual cleaning feature using a combination of a brush roller with the silicone/adhesive cleaning rollers. The combination dual dust removal system assures better results than a single brush or adhesive roller system.

The MALCOM RCX Series Modular Reflow Oven Profiling System offers complete profiling of reflow ovens, including oven temperature, video imaging, O2 concentration and convection air velocity. It verifies that ovens are performing at optimal conditions, and enables users to troubleshoot problem areas.

About Seika Machinery, Inc.

Seika Machinery, Inc. (SMI) is a subsidiary of Seika Corporation, Japan and member of the Mitsubishi Global Group. SMI provides electronics manufacturers with advanced machinery, superior materials and engineering services.

For more information click here.

Share

Print


Suggested Items

What Makes a Good Process Engineer?

03/03/2021 | Nolan Johnson, I-Connect007
Nolan Johnson recently spoke with Tuan Tran, director of customer solutions at Green Circuits, about what makes a successful process engineer. They also discuss a typical day in the life of a process engineer—from pre-manufacturing through post-DFM, for process improvement. As Tuan points out, there are a variety of paths to becoming a great process engineer.

Tech 2 Tech: KYZEN’s Short Technical Sessions a Big Hit

01/20/2021 | Nolan Johnson, I-Connect007
Nolan Johnson gets an update from Tom Forsythe on KYZEN’s Tech 2 Tech sessions. These brief 15-minute sessions were set up during the pandemic by KYZEN for customers, prospects, and new engineers around cleaning, and have since found traction with their manufacturers, reps and distributors.

This Month in SMT007 Magazine—Continuous Improvement: As Simple as X = Xc – 1

01/04/2021 | I-Connect007 Editorial Team
X=Xc – 1 is a conceptual equation for continuous improvement. You define X and work to reduce it by a factor of 1. This could be one work hour, one process step, one day less in a cycle, and so on. We recently met with Dr. Ron Lasky to discuss the concept of X=Xc – 1 and get his advice on generating enthusiasm among readers and the next generation about continuous improvement. As this discussion illustrates, many process improvements are small in scale, not yearlong, major efforts.



Copyright © 2021 I-Connect007. All rights reserved.