Nordson Acquires Clada Medical Devices


Reading time ( words)

Nordson Corporation has acquired Clada Medical Devices, a Galway, Ireland based design and development operation primarily focused on balloons and balloon catheters. The transaction is not material to Nordson results and terms of the deal were not disclosed.

“Clada enhances Nordson MEDICAL’s design and development capabilities, which further supports our position as a leading full-device solution and component manufacturing resource for OEM’s across the interventional and surgical medical device landscape,” said Jeffrey Pembroke, executive vice president of Nordson Advanced Technology Systems – Fluid Management. “We are excited to welcome the Clada associates to the Nordson MEDICAL family. We look forward to integrating their engineering expertise and enhancing our medical device offerings.”

Clada will become part of the Nordson MEDICAL product line within Nordson’s advanced technology systems segment. This acquisition builds on the company’s strategic objective to grow Nordson’s precision applications within the minimally invasive medical device market.

About Nordson Corporation

Nordson Corporation engineers, manufactures and markets differentiated products and systems used to dispense, apply and control adhesives, coatings, polymers, sealants, biomaterials, and other fluids, to test and inspect for quality, and to treat and cure surfaces.  These products are supported by application expertise and direct global sales and service.  Nordson serves a wide variety of consumer non-durable, durable and technology end markets including packaging, nonwovens, electronics, medical, appliances, energy, transportation, construction, and general product assembly and finishing.  Founded in 1954 and headquartered in Westlake, Ohio, the company has operations and support offices in nearly 40 countries. 

Share

Print


Suggested Items

RTW IPC APEX EXPO 2019: iNEMI on Next-generation Soldering

03/13/2019 | Real Time with...IPC
Grace O’Malley, VP of technical operations at iNEMI, and Editor Nolan Johnson discuss the next-generation soldering buzz session workshop hosted by iNEMI at IPC APEX EXPO 2019 and the upcoming bi-annual technology roadmap that will be released this spring.

Nate Ramanathan on Choosing a Prototype Partner and Production Supplier

03/12/2019 | Nolan Johnson, I-Connect007
AEye, a developer of perception systems for autonomous vehicles, has transitioned from initial engineering development into the final design for production and manufacturing of very large quantities. In an interview with I-Connect007, Nate Ramanathan, VP of operations at AEye, speaks about the criteria and his perspective on selecting vendors.

Advice to OEM System Designers

03/06/2019 | I-Connect007 Research Team
In our previous survey, we asked the following question: "What advice would you give an OEM system designer?" Here are just a few of the replies, slightly edited for clarity.



Copyright © 2019 I-Connect007. All rights reserved.