Shenmao to Exhibit New Solder Alloys at IWLPC


Reading time ( words)

Shenmao Technology Inc. plans to exhibit at the International Wafer-Level Packaging Conference, scheduled to take place October 23-25, 2018 at the DoubleTree by Hilton San Jose in California. The company will showcase its new PF906-S and PF912-S solder alloys.

Shenmao's high thermal/drop reliability series solder alloys can be used in a wide range of solder applications. The alloys have a similar operating temperature window to Sn-Ag-Cu alloys, so that they can easily be adopted into existing packaging processes.

The PF906-S Sn/Ag4.0/Cu0.5/Bi3.0/Ni0.05 alloy has excellent thermal reliability and is designed for use in automotive electronic applications.

The PF912-S Sn/Ag2.0/Cu0.5/Bi3.0/Ni0.05 alloy has excellent thermal and impact reliability compared to conventional solder alloys such as SAC305 and SAC405.

Shenmao has successfully been approved by many international well-known electronic manufacturers. The company strives to offer the best quality without compromising cost and time-to-market while providing maximum value to all customers. As the world’s major solder materials provider, Shenmao produces SMT solder paste, laser soldering paste, cored solder wire, wave solder bar, semiconductor packaging solder spheres, wafer bumping solder paste, flux and solar PV ribbon.

Shenmao America Inc. blends SMT solder paste at its facility in San Jose, California for distribution in North America.

About Shenmao

Shenmao is dedicated to the production of solder products including water soluble and no-clean solder paste, laser solder paste, solder preforms, cored solder wire, wave solder bar alloys, wave soldering fluxes, extremely pure solder powder up to type 8, BGA and micro BGA solder sphere, wafer level packaging solder paste and fluxes, LED die attach paste, high performance liquid fluxes, solder preform, solar ribbon, plating anode used in PCB fabrication, assembly and semiconductor packaging processes.

For more information, please click here.

Share


Suggested Items

Survey: Low-Temperature Soldering on PCBAs

11/14/2018 | Stephen Las Marias, I-Connect007
The majority of the respondents in our survey stated that they expect low-temperature soldering to result in higher quality PCBAs.

Investigation on the Assembly Process for m03015 and a Brief Look at m0201 Components

11/14/2018 | David Geiger, Robert Pennings, and Jane Feng, Flex
Components continue to shrink in the SMT world, and the next evolution of passive components includes m03015 (009005) and m0201 (008004). The m03015 and the m0201 components will see primary adoption in products that require further miniaturization, which would be SiPs. These modules would then be assembled into products through attachment, another assembly, or via other interconnect methods. This article explores the development of an assembly process (SMT only) for the m03015 component.

How to Avoid Common Wave Soldering Issues

11/13/2018 | Neil Blundell, Blundell Production Equipment
Wave soldering involves using waves of molten solder that act as glue to attach electrical components to the PCB. While this process is expedient and efficient in producing high-quality products, it sometimes experiences glitches that can be prevented or corrected. This article explores some of the main issues and how to remedy them.



Copyright © 2018 I-Connect007. All rights reserved.