CyberOptics Will Demonstrate MRS-Enabled SQ3000 for AOI, SPI and CMM at electronica 2018


Reading time ( words)

CyberOptics Corporation will exhibit at electronica 2018, scheduled to take place November 13-16, 2018 at the Messe Munchen in Munich, Germany. The company will demonstrate the MRS-Enabled SQ3000 with multi-process capabilities including 3D AOI, SPI and CMM applications in hall A3, booth # 272.

cyberoptics.jpg

The SQ3000 offers a combination of unmatched accuracy and speed with the industry-leading multi-reflection suppression (MRS) sensor technology that meticulously identifies and rejects reflections caused by shiny components and surfaces. Effective suppression of multiple reflections is critical for highly accurate measurement, making the proprietary MRS technology an ideal solution for a wide range of applications with exacting requirements.

The SQ3000, deemed best-in-class, has been widely used for 3D automated optical inspection (AOI) and can now be used for 3D solder paste inspection (SPI) for the best accuracy, repeatability and reproducibility – even on the smallest paste deposits. Combined with the award-winning, easy-to-use SPI software, SPI has reached a new level of precision for the most stringent requirements.

Additionally, the SQ3000 can be used to attain highly accurate coordinate measurements faster than a traditional coordinate measurement machine (CMM) – in seconds, not hours. The world’s first in-line CMM includes a comprehensive software suite for use in industrial metrology, semiconductor, microelectronics and SMT applications.

Customers worldwide are using the SQ3000 3D inspection and measurement system to improve yields, quality and operational efficiencies in their manufacturing facilities.

About CyberOptics

CyberOptics Corporation is a leading global developer and manufacturer of high precision sensing technology solutions. CyberOptics’ sensors are used in SMT, semiconductor and metrology markets to significantly improve yields and productivity. By leveraging its leading edge technologies, the company has strategically established itself as a global leader in high precision 3D sensors, allowing CyberOptics to further increase its penetration of key vertical markets. Headquartered in Minneapolis, Minnesota, CyberOptics conducts worldwide operations through its facilities in North America, Asia and Europe.

For more information, click here.  

 

Share


Suggested Items

Survey: Low-Temperature Soldering on PCBAs

11/14/2018 | Stephen Las Marias, I-Connect007
The majority of the respondents in our survey stated that they expect low-temperature soldering to result in higher quality PCBAs.

Investigation on the Assembly Process for m03015 and a Brief Look at m0201 Components

11/14/2018 | David Geiger, Robert Pennings, and Jane Feng, Flex
Components continue to shrink in the SMT world, and the next evolution of passive components includes m03015 (009005) and m0201 (008004). The m03015 and the m0201 components will see primary adoption in products that require further miniaturization, which would be SiPs. These modules would then be assembled into products through attachment, another assembly, or via other interconnect methods. This article explores the development of an assembly process (SMT only) for the m03015 component.

Alpha Assembly Solutions on Training, Education, and Low-Temperature Soldering

11/07/2018 | I-Connect007 Editorial Team
In this interview, Jason Fullerton of Alpha Assembly Solutions discusses the benefits and challenges of low-temperature soldering. He also highlights the biggest concerns he’s currently seeing in the industry, including young engineers lacking hands-on manufacturing experience and training, voiding and head-in-pillow issues, and low-temperature soldering demands.



Copyright © 2018 I-Connect007. All rights reserved.