Zentech Adds Aquastorm In-Line Cleaner


Reading time ( words)

Zentech has added the Aquastorm 200C in-line cleaner to its robust  equipment set. The Aquastorm was selected via an Extensive Design of Experiment (DoE) competitive selection process by Zentech engineers.

The system’s wash and rinse cycles are closed loop, minimizing the machines impact on the environment, while maintaining an effective cleaning capability. The water utilized by the Aquastorm is first cleaned by a water treatment system.  City water is precleaned by RO filters prior to treatment that removes heavy metals, anions, cations and organic contaminates from the water.  Any organisms that might start to grow in the closed loop system are killed by UV light.  The end result is that the water used to process Zentech assemblies is near lab purity. 

The wash tank and rinse tank are uniquely configured with 33 spray bars of three types, and two giant pumps totaling 35 hp.  Together they provide impressive water volume and pressure required for the various types of spray bars to clean effectively.

The 200C was developed specifically to clean BTC (Bottom Terminated Components) and Low Profile Devices.  Zentech specializes in the manufacture of highly complex, extremely dense printed circuit boards, most with hundreds of bottom terminated components. The Aquastorm 200C is a welcome upgrade contributing to Zentech's continued success of manufacturing mission and life critical electronics.

About Zentech

Zentech Manufacturing, Inc. is a privately held, engineering-driven contract manufacturer specializing in the design and manufacture of highly-complex electronic and RF circuit cards and assemblies. The company is headquartered in its purpose-built facility located in Baltimore, MD, and in Fredericksburg, VA, and maintains several key certifications, including ISO 9001:2015, ITAR (US State Dept.), AS9100D (aerospace), and ISO 13485 (medical). In addition, Zentech is a certified IPC Trusted Source supplier for Class 3 mission-critical electronics, and the company is IPC J-STD-001 Space Addendum QML certified and is now NIST 800-171 compliant. Zentech Fredericksburg operations is also a Mid-Atlantic leader in the fabrication of wire harnesses and over-molded cables for harsh environments.

Share

Print


Suggested Items

4 Key Considerations When Auditing a New EMS Partner

06/07/2019 | Neil Sharp, JJS Manufacturing
Choosing whether (or not) to outsource your electronics manufacturing is likely to bring with it a multitude of questions—and some understandable doubts. Outsourcing is a critical decision—and it’s one that will rely on thorough research, close examination and the asking of some tough questions. This article summarizes four key areas that you'll want to scrutinize as you embark on your supplier selection process.

Synergy Between Smart Manufacturing and the Secure Supply Chain (Part 1)

05/29/2019 | Michael Ford, Aegis Software Corp.
As MRP and ERP functions follow computing trends and start to migrate into the cloud, a fundamental question is being raised as to whether these are still the right tools to use in today’s modern Industry 4.0 driven factory, or whether these need to evolve, be enhanced, or even replaced in order to meet the more extreme requirements of operational flexibility, as well as cope with volatile material availability in the market.

4 Ways Electronics Manufacturers are Growing Their Businesses in 2019

05/27/2019 | Neil Sharp, JJS Manufacturing
At a time when many manufacturers are struggling to remain profitable, and with the uncertainty of the Brexit negotiations still looming large, finding new ways to nurture and grow your electronics manufacturing business has never been more crucial. Yet, despite the current challenges, some EMS providers are bucking the trend with reports of sustained growth. Here is their secret.



Copyright © 2019 I-Connect007. All rights reserved.