AIM’s Kevin Pigeon Obtains SMT Process Engineer Certification


Reading time ( words)

AIM Solder announced that Kevin Pigeon, senior applications manager – has successfully completed the SMT Processes Certification program, and is now recognized as a Certified SMT Process Engineer (CSMTPE).

The SMTA Certification Program is a three-day classroom seminar, intended for experienced SMT Process and Manufacturing Engineers, where multiple SMT manufacturing process topics are reviewed and discussed in preparation for the final examination. The program concludes with a challenging day-long open book test that requires both written answers and calculations, with the intent to enable the attendee to establish competitive credentials, as certified by the SMTA.

“We are proud of Kevin’s achievements and thrilled to have him on our global technical applications team,” said Carlos Tafoya, AIM’s technical support director. “We are confident that Kevin will continue to share his knowledge with our staff and customers, contributing to the continued success of our team.”

About AIM

Headquartered in Montreal, Canada, AIM Solder is a leading global manufacturer of assembly materials for the electronics industry with manufacturing, distribution and support facilities located throughout the world. AIM produces advanced solder products such as solder paste, liquid flux, cored wire, bar solder, epoxies, lead-free and halogen-free solder products, and specialty alloys such as indium and gold for a broad range of industries. A recipient of many prestigious SMT industry awards, AIM is strongly committed to innovative research and development of product and process improvement as well as providing customers with superior technical support, service and training. For more information about AIM, click here.

Share

Print


Suggested Items

Solder Paste Printing From the Stencil’s Perspective

02/19/2020 | I-Connect007 Editorial Team
Jeff Schake of ASM Assembly Systems discusses the complications surrounding printing and solder paste that he sees from his perspective as a stencil expert.

Blackfox Trains Veterans for Good Manufacturing Jobs

02/18/2020 | Real Time with...IPC
Blackfox Training Institute has been training manufacturing technologists for over 20 years. Based in Longmont, Colorado, Blackfox is now focused on helping veterans of our armed services transition into good jobs in the manufacturing sector. During IPC APEX EXPO 2020, Editor Nolan Johnson spoke with Blackfox CEO Al Dill about the company's veteran training programs, and how this effort is helping companies fill jobs that might otherwise go unfilled.

Solder in PCBA: Can’t Live Without It... or Can We?

02/17/2020 | Joe Fjelstad, Verdant Electronics
For most of its historical use in electronics, the solder alloy of choice was tin-lead, either an Sn60/Pb40 alloy or the Sn63/ Pb37 eutectic version of the tin-lead alloy. These two alloys were the workhorses of the industry. They were both well understood in terms of their processing and reliability—that is, until the advent of lead-free, a well-meaning but ill-conceived and poorly executed conversion, forced on the industry by the European Union in 2006.



Copyright © 2020 I-Connect007. All rights reserved.