Enics Västerås Appoints Jan Olovsson as Interim General Manager


Reading time ( words)

Jan Olovsson has been appointed interim general manager in Enics Västerås business unit effective December 3, 2018.

Olovsson will work closely together with Enics Group management and Enics Västerås management to continue the favorable development of Västerås business unit in the areas of operational performance and customer focus.

Share

Print


Suggested Items

Comparing Soldering Results of ENIG and EPIG Post-steam Exposure

09/11/2019 | Jon Bengston and Richard DePoto, Uyemura International USA
Electroless nickel immersion gold (ENIG) is now a well-regarded finish used to enhance and preserve the solderability of copper circuits. Electroless palladium immersion gold (EPIG), meanwhile, is a new surface finish also for enhancing and preserving solderability—but with the advantage of eliminating electroless nickel from the deposit layer. This feature has become increasingly important with the increasing use of high-frequency PCB designs whereby nickel’s magnetic properties are detrimental.

Size Matters: The Effects of Solder Powder Size on Solder Paste Performance

07/08/2019 | Tony Lentz, FCT Assembly
Solder powder size is a popular topic in the electronics industry due to the continuing trend of miniaturization of electronics. And the question commonly asked is, "When should we switch from Type 3 to a smaller solder powder?" Read more to find out.

What Drives Your Optimism?

03/13/2019 | I-Connect007 Research Team
In our previous I-Connect007 survey, we asked the following question: "What drives your optimism?" Here are just a few of the replies, slightly edited for clarity.



Copyright © 2020 I-Connect007. All rights reserved.