I-Connect007 Research


Reading time ( words)

In a recent SMT007 survey, we asked our readers how inspection has helped them improve their manufacturing process. Here are just a few of the answers, edited slightly for clarity.

John Meyer, Methode Electronics Inc.: "Inspection quickly catches placement defects."

Gregory J. Vance, Rockwell Automation: "Identify defects earlier at the assembly process, enabling the issue(s) to be resolved, reducing the overall quantity of defects long term."

Christopher Jones, Prescient Wireless: "We analyze the inspection data to identify if the manufacturing process needs to be adjusted or if an operator needs to be retrained."

Share

Print


Suggested Items

RTW IPC APEX EXPO 2019: Lenthor Discusses Facility Expansion and New Equipment

02/20/2019 | Real Time with...IPC
Rich Clemente, general manager of Lenthor Engineering, discusses with Dan Feinberg, I-Connect007 Guest Editor, the company’s expansion and new facility and equipment. He also talks about his outlook for the electronics manufacturing industry in North America.

RTW IPC APEX EXPO 2019: KIC Speaks on Data, Voiding and Traceability

02/04/2019 | Real Time with...IPC
Bjorn Dahle, president of KIC, talks with I-Connect007 Technical Editor Pete Starkey about how the industry has shifted its focus from the machine to data; the issue on voiding and how manufacturers can address this process challenge; and traceability.

More Than Inspection: It’s Process Improvement

01/09/2019 | Barry Matties, I-Connect007
Barry Matties speaks with Brian D’Amico, president of MIRTEC, about the current state of machine-to-machine communication in the industry, and how the inspection company is interfacing with the different manufacturing languages currently available to gather predictive data and feedback from every inspection step to eliminate future defects.



Copyright © 2019 I-Connect007. All rights reserved.