Zentech’s New Drone Video Highlights Significant Technology Investments


Reading time ( words)

EMS firm Zentech Manufacturing Inc. has released a new drone video of its Baltimore HQ location that features its significant investments in technology to support its customers’ increasingly advanced requirements, particularly in the military/aerospace and medical electronics applications.

Among the investments featured in Zentech’s newest drone video are the Aquastorm 200C Cleaning System, the Seica Pilot 4D V8 Flying Probe System, and its advanced conformal coating operations.

The Aquastorm 200C was developed specifically to clean BTC (bottom terminated components) and low-Profile Devices. As Zentech specializes in the manufacture of highly complex, extremely dense PCBs with hundreds of bottom terminated components, the Aquastorm 200C is a welcome upgrade contributing to the company’s continued success in manufacturing mission and life critical electronics.

Featuring vectorless and in-circuit test, programming and functional testing, boundary scan test, medium/high volume capability, the Pilot V8 enhances Zentech’s testing capabilities.

Finally, for acrylic applications, Zentech has developed an automated process for its conformal coating operations. By atomizing the acrylic into very fine, even-sized particles, Zentech can control the acrylic application thicknesses down to 0.1 mil. This atomization process allows for the precise tuning of RF circuit card applications

New 2018 Zentech Baltimore Video Tour:

Share

Print


Suggested Items

UV-curable Materials and Conformal Coatings

12/23/2019 | Pete Starkey, I-Connect007
Pete Starkey and Phil Kinner, global business and technical director, coatings division, Electrolube, discuss the characteristics and benefits of the company’s new UV-cured conformal coatings. Phil also describes the development of coatings for critical avionics applications and Electrolube’s collaboration with the U.K. National Physical Laboratory to establish a new condensation test.

Reliability Testing in Automotive and Digital Factories

12/11/2019 | Barry Matties, I-Connect007
Barry Matties spoke with Gen3’s Andrew Naisbitt about what readers should know about SIR and CAF testing, what to consider if you’re thinking of bringing it in-house, and how reliability testing fits into automotive and the digital factory.

André Bodegom on European Challenges, Automation, and Automotive

12/02/2019 | Pete Starkey, I-Connect007
Editor Pete Starkey speaks with André Bodegom, managing director for Adeon Technologies in the Netherlands, about changes he has seen over the years in major industry sectors, challenges in the European market, and other areas of growth.



Copyright © 2020 I-Connect007. All rights reserved.