IPC Subcommittee to Host Open Forum on Weak Microvia Interface during IPC APEX EXPO


Reading time ( words)

The IPC V-TSL-MVIA Weak Interface Microvia Failures Technology Solutions Subcommittee, formed this year, is working to identify the risks, causes, and mitigation of failures due to a weak interface between the plated copper at the bottom of a microvia and the underlying copper surface. The activity grew out of the development of IPC-WP-023, a white paper that cast a light on how a weak microvia interface is a hidden reliability threat.

The subcommittee will hold an open forum for industry to learn about its activities as well as its planned path forward. Attendees will be invited to share their own issues regarding weak microvia interfaces and will learn how to participate on the subcommittee.

IPC Weak Microvia Interface Open Forum
Wednesday, January 30, 2019
10:15 AM to 12:00 PM
San Diego Convention Center
Room 6

Order IPC WP-023, IPC Technology Solutions White Paper on Performance-Based Printed Board OEM Acceptance via Chain Continuity Reflow Test: The Hidden Reliability Threat – Weak Microvia Interface from the IPC bookstore.

Share

Print


Suggested Items

EIPC Summer Conference 2019, Day 1

09/10/2019 | Alun Morgan, EIPC
The beautiful city of Leoben in central Austria provided the setting for the EIPC 2019 Summer Conference. In this article, EIPC Chairman Alun Morgan provides the highlights of the first day of the event, including a recap of the technical presentations.

Putting Green Into a Brownfield Facility

09/05/2019 | Nolan Johnson, I-Connect007
George Milad, national accounts manager for technology at Uyemura, talks about what is driving change in the wet process marketplace and how chemistries must fit into next-generation product design while also meeting new environmental requirements.

Meet Mike Hill, I-Connect007 Columnist

09/02/2019 | I-Connect007
Mike Hill has been in the PWB fabrication industry for over 40 years. Throughout his career, he has been a member of IPC and participated in specification writing for both IPC and the military. Within IPC, he has received the President's Award, General Chairmanship, Committee Chairmanship, and many other recognitions. In his columns, Mike will help you better understand the requirements and how-to's for MIL-PRF-31032 certification for PWB fabrication.



Copyright © 2019 I-Connect007. All rights reserved.