Get 20% Registration Discount at IPC APEX EXPO 2019


Reading time ( words)

The end of 2018 is near—which means we're getting closer to coming together as an industry at IPC APEX EXPO 2019, North America's largest electronics manufacturing event. But, even more important, your opportunity to save 20% on your advance registration ends on December 21. That's an additional savings on the other great offers you'll find below.

Here are four reasons why attending IPC APEX EXPO 2019 will help you find more industry success in your future:

1. Important things happen when you network with the industry’s who’s who.

Whether you are established in your career or just starting out, IPC APEX EXPO 2019 will be the year’s best networking event to make new connections, strengthen existing relationships and become a mentor/meet a mentor.

2. You’ll experience North America’s most applicable educational experience.

All IPC APEX EXPO 2019 education programming is designed by your industry peers to help address current and future industry challenges via real-world application. In fact, 83% of IPC APEX EXPO attendees say the training and education delivered meet or exceed their learning objectives.1

3.  You can immerse yourself in innovation on the show floor.

Explore and compare equipment, software and other solutions from nearly 500 of the top innovators and suppliers from the entire supply chain—all under one roof. You can also experience a live demonstration of The HERMES Standard and IPC Connected Factory Exchange (CFX)—with a larger presence of supporting exhibitors than ever before.

4. You’ll be in San Diego, California, in January.

With average high temperatures near 70°F/21°C, you’ll experience a climate that makes the buzz and energy of IPC APEX EXPO 2019 all the more exciting.

Share

Print


Suggested Items

June Issue of SMT007: A Snapshot of a Resilient Industry

06/30/2020 | Tamara Jovanovic, Happiest Baby
Tamara Jovanovic, an electrical engineer at Happiest Baby in Los Angeles, never imagined that I would have to take half of my lab equipment home to be able to continue doing her job. As she says in her review of the June issue of SMT007 Magazine, the entire industry is adapting to the "new normal," and ready for whatever the future brings.

IPC’s Shawn Dubravac: COVID-19 Outbreak Accelerates Industry Shifts Already Under Way

05/21/2020 | Barry Matties, I-Connect007
On May 19, Barry Matties spoke with Shawn Dubravac, chief economist for IPC. While discussing other topics, Matties asked for Dubravac’s perspective on shifts in the market, who observed that the recessionary trend might be behind us; the markets are already showing recovery. Still, it could take a year or so to fully recover.

Happy’s Smart Factory Protocol Primer

04/29/2020 | Happy Holden, I-Connect007
The smart factory concept is built upon data interchange as the foundation. There has been much development in the area of industrial and manufacturing data protocols over the years, stretching back into the 1960s. This article by Happy Holden surveys what are considered the most common protocols in use in the electronics manufacturing industry today, including IPC-CFX/ Hermes, OML, SECS/GEM, and MAPS.



Copyright © 2020 I-Connect007. All rights reserved.