Dorigo Systems Utilizes Koh Young’s Data-Driven, Full 3D Inspection System


Reading time ( words)

Dorigo Systems has integrated the Koh Young KY8030-3 solder paste inspection (SPI) and Zenith 3D AOI system into its high speed printed circuit board (PCB) assembly lines providing true 3D optical inspection. Dorigo is one of only a few select EMS providers in Canada that uses a true 3D measuring system providing foreign material inspection for the entire PCBA – vastly improving the ability to detect board defects during the manufacturing process.

“At Dorigo Systems, we continue to adapt our electronics manufacturing processes to achieve close to zero board defects,” states Paul Vasvary, business development manager, Dorigo Systems. “By implementing the Koh Young Technology that analyzes true 3D measurement, Dorigo is building PCBA’s right the first time.”

By accessing all board data, Dorigo Systems uses an inspection solution that collects and analyzes large amounts of data producing traceable results and increasing board quality. The Koh Young KY8030-3 SPI and Zenith 3D AOI system detects all kinds of board defects using patented shadow-free 3D moiré technology including: missing, offset, rotation, polarity, upside down, OCV/OCR, solder filet, billboarding, lifted lead, lifted body, and tombstone bridging.

 “The Zenith series provides superior results by measuring every aspect of the component and solder joint according to IPC-A-610 standards,” says Chas Yu, Dorigo’s quality manager. “By quickly measuring components and solder joints, and then offering critical height information to the inspection algorithms, we can now immediately identify errors like pad overhang and insufficient solder.”

The Koh Young KY8030-3 SPI and Zenith 3D AOI system uses data-driven analytics to overcome production challenges, and enables smart manufacturing for Dorigo Systems' high speed lines, vastly improving board inspection. True 3D optical scanning removes shadow problems by utilizing 8-way projection while providing accurate PCB inspection data with real-time PCB warp compensation.

“When it comes to building high-precision electronics, there is no margin for error,” states Vasvary. “3D optical inspection ensures we continue to provide superior electronics manufacturing services to our customers.”

Share

Print


Suggested Items

Seven Key Steps to Selecting a New EMS Partner

08/14/2019 | Neil Sharp, JJS Manufacturing
Choosing to outsource your electronics manufacturing to an EMS provider requires careful planning and consideration. And even once you’ve made your decision, there may still be things that test you or that don’t go quite to plan. An experienced EMS partner has been there before; they understand the challenges, and they’ll be able to support you through the process to ensure you achieve your goals.

Which Matters Most: Unit Cost or Total Cost of Supply?

08/09/2019 | Neil Sharp, JJS Manufacturing
The primary objective for any OEM is to design, manufacture, and deliver high-quality products in the most cost-effective way possible. When demand patterns change, or there is an increase in competition, it can be easy to rely on the calculation of unit cost to relieve the price pressure. But, as many manufacturers are discovering, choosing to base their outsourcing decisions purely on unit cost may not always reap the expected benefits in the long term.

How Do I Get Smart With IPC CFX? (Part 2)

07/31/2019 | Michael Ford, Aegis Software Corp.
The introduction of the CFX standard is the critical trigger that enables smart, flexible factory operation in line with business needs. The technology is simple to adopt, which creates a true “plug-and-play” environment on which advanced production AI software technologies can be developed.



Copyright © 2019 I-Connect007. All rights reserved.