Ascentech to Exhibit GEN3 Test Equipment at IPC APEX EXPO


Reading time ( words)

Ascentech LLC will be showing GEN3 Systems’ most recent enhancements to its already popular AutoSIR (surface insulation resistance) and AutoCAF (conductor anodic filament) test equipment at IPC APEX EXPO 2019 in booth #2132.

Ever-increasing demands for higher voltage testing capability, longer test durations, and the capability for simultaneous testing  at multiple voltages are being imposed by the expanding Automotive Industry and Electric Vehicle development. These are met by the new AutoSIR2+ and AutoCAF2+ systems, whose features include:

  • Totally revised software for both instruments
  • The ability to simultaneously run 3 different bias voltages
  • High Voltage CAF Testing to 1,250V (specific controlled applications)
  • Designed to meet the new International Standard published in 2016 with respect to Electric Vehicles (EV’s): ISO PAS 19295:2016(E).

Further detailed information is available from GEN3 Systems Ltd. and Ascentech LLC; also, stop by Booth #2132 at the show and see the equipment.

Share

Print


Suggested Items

STEM: The Future of Our Industry

01/22/2019 | Barry Matties, I-Connect007
Facing a growing shortage of talented labor with which to fill the employment positions in America, IPC is working to help solve this problem. Colette Buscemi, senior director of IPC’s education programs, is encouraging IPC members to better engage pre-college and post-secondary college students at the local level. Barry Matties spoke with Colette about the educational programs IPC has put in place to invest in future generations, including the STEM program at this year’s IPC APEX EXPO.

IPC APEX EXPO 2019 to Demo Operating CFX Line

01/21/2019 | I-Connect007 Editorial Team
A year on from their first demonstration, IPC’s Connected Factory Exchange (CFX) now nears the release of version 1.0 at this year’s upcoming IPC APEX EXPO. The I-Connect007 team spoke with CFX specialists Michael Ford and Dave Bergman about how far the program has come from the first initial public demo all the way through now becoming a published standard, and what users can expect from the demonstrations planned for the 2019 show.

Solder Paste Selection/Qualification

01/16/2019 | Stephen Las Marias, I-Connect007
In a recent SMT007 survey, we asked the following question: " What are your challenges when it comes to solder paste selection/qualification?" Here are just a few of the replies, slightly edited for clarity.



Copyright © 2019 I-Connect007. All rights reserved.