EMS Installs Second MEK AOI Machine


Reading time ( words)

Electronic Manufacturing Solutions Limited (EMS) has installed a new MEK PowerSpector GTAz+GDAz 550BTL CE 9 Camera inline AOI machine.

The PowerSpector GTAz+GDAz 550BTL contains one off 18.75u HD Camera with telecentric optics and eight off 10u side cameras for side and edge inspection of components. The omnidirectional multi angle, multi-colour LED lighting provides class leading assessment of the solder meniscus and the capability to test a range of criteria on all types of solder joints.

“I am very pleased with the investment in our PowerSpector GTAz+GDAz 550BTL, the additional capacity it brings along with its class leading optics. This is another significant step in the company’s growth”, said Bernard Chubb, managing director of EMS.

This will enable us to increase capacity dramatically, we look forward to being able to provide increased customer satisfaction through this additional resource whilst continuing with industry-leading turnaround times and exceptional levels of quality,” said EMS’ Sales Manager Rob Moore.

“The PowerSpector GTAz+GDAz 550BTL is a critical investment in keeping pace with the increasing miniaturisation and complexity with the class leading optics, software and support being critical to the EMS selecting MEK.”, said Jonathan Plummer, General Manager of EMS. “The MEK PowerSpector GTAz+GDAz 550BTL contains two camera, top and bottom, which are able to inspect both sides of an assembly in one process, be it double sided surface mount only or surface mount and through hole”.

Share

Print


Suggested Items

Industry Outlook from IPC's Sharon Starr

03/18/2019 | Patty Goldman, I-Connect007
Sharon Starr, IPC's director of market research, provides updates on the EMS and PCB industry outlook, benefits of IPC membership and participation, plans to expand the EMS statistical program, and new studies being published.

RTW IPC APEX EXPO 2019: Reducing Voiding in Reflow Soldering

03/06/2019 | Real Time with...IPC
Chris Nash, product manager for PCB assembly solder paste at Indium Corporation, speaks with Kelly Dack and highlights Indium’s take on three important aspects of reliability: thermal, mechanical, and electrical. He talks about challenges of all three aspects, which include solder voiding, and how Indium helps the industry address these issues through its solder paste formulations.

Two Full CFX Demo Lines at IPC APEX EXPO 2019

03/05/2019 | Dan Feinberg, Technology Editor, I-Connect007
During IPC APEX EXPO, Editor Dan Feinberg spoke with David Bergman, IPC VP of standards and technology, about CFX, IPC’s Connected Factory Exchange software for machine-to-machine communication. With more than companies now supporting CFX, IPC set up two full lines for demonstration at the show.



Copyright © 2019 I-Connect007. All rights reserved.