KIC Showcases Connected Smart Reflow at IPC APEX EXPO 2019


Reading time ( words)

KIC will exhibit in booth no. 1215 at the 2019 IPC APEX EXPO, scheduled to take place January 29-31, 2019 at the San Diego Convention Center in California. Visit the KIC booth for a reflow profiling clinic for void reduction.                                          

RPI i4.0, an easy built-in solution for automation, traceability, advanced reflow data collection and sharing for Smart Factory integration. KIC RPI i4.0 automatically acquires profile data from each PCB soldered in the reflow or curing oven, in real-time. This new ecosystem offers real-time thermal process dashboard and traceability, reduced scrap and rework, fast defect troubleshooting, lower electricity use and more. Advanced data search and communication features save engineers valuable time.

With RPI i4.0, all relevant data can connect to the factory MES or your factory data collection system to be easily shared with personnel and can be accessed from any authorized PC or mobile device. The enhanced level of automation delivers improved line utilization and productivity.

The SRA (Smart Reflow Analyzer) is a new-generation reflow and curing oven stability tool that will be discussed at the show.

KIC’s ecosystem offers solutions for reduction of downtime, faster reflow oven setup, automation and Smart Factory integration.

Share

Print


Suggested Items

June Issue of SMT007: A Snapshot of a Resilient Industry

06/30/2020 | Tamara Jovanovic, Happiest Baby
Tamara Jovanovic, an electrical engineer at Happiest Baby in Los Angeles, never imagined that I would have to take half of my lab equipment home to be able to continue doing her job. As she says in her review of the June issue of SMT007 Magazine, the entire industry is adapting to the "new normal," and ready for whatever the future brings.

IPC’s Shawn Dubravac: COVID-19 Outbreak Accelerates Industry Shifts Already Under Way

05/21/2020 | Barry Matties, I-Connect007
On May 19, Barry Matties spoke with Shawn Dubravac, chief economist for IPC. While discussing other topics, Matties asked for Dubravac’s perspective on shifts in the market, who observed that the recessionary trend might be behind us; the markets are already showing recovery. Still, it could take a year or so to fully recover.

Happy’s Smart Factory Protocol Primer

04/29/2020 | Happy Holden, I-Connect007
The smart factory concept is built upon data interchange as the foundation. There has been much development in the area of industrial and manufacturing data protocols over the years, stretching back into the 1960s. This article by Happy Holden surveys what are considered the most common protocols in use in the electronics manufacturing industry today, including IPC-CFX/ Hermes, OML, SECS/GEM, and MAPS.



Copyright © 2020 I-Connect007. All rights reserved.