Cemtrex’s EM Segment Reports 18% Revenue Drop in Fiscal 2018

Reading time ( words)

Cemtrex Inc. announced its financial results for the fiscal year ending September 30, 2018.


• Generated revenue of $89,936,519
• Adjusted EBITDA of $1,658,438
• Electronic manufacturing segment backlog of $52,000,000
• Advanced Technology segment backlog of 815 orders for flagship IoT product, SmartDesk
• Gross profit increased from 33% of revenue to 35% of revenue
• Listed on Deloitte’s Fast 500 for 5th Year
• Acquired 46% of surveillance tech developer Vicon

Fiscal 2018 was both a transformational and transitional year for Cemtrex. While revenue in the electronics manufacturing (EM) segment decreased by 18% due to the loss of two customers, the EM segment currently has a $52,000,000 backlog, which should boost revenue for fiscal 2019.

The Company’s Industrial Technology (IT) segment revenues were also lower, as this business segment continues to experience weakness in new orders in its environmental instruments and control products markets, both domestically and internationally. As fewer projects are being decided and awarded due to the relaxation and non-enforcement of environmental regulations under the current administration, the Company has taken steps to reduce its operating expenses to bring them in line with anticipated revenues. The Company will continue to reduce its presence in the environmental control products markets in the coming year and shift its focus into smart devices and virtual reality applications.

The Company invested heavily in R&D in fiscal 2018, spending over $5.5 million to expand its proprietary technology base including advances its smart devices and virtual and augmented reality. The Company expects these critical investments will yield strong revenue growth and higher margins as it continues its transformation from an electronics contract manufacturer to a higher-margin technology innovator.

Cemtrex’s advanced technology (AT) segment anticipates that demand for its flagship Internet of Things (IoT) product, SmartDesk, will continue to rise as it increases its marketing efforts and as deliveries start taking place. With SmartDesk’s average selling price of $5,000 per desk, the AT segment anticipates selling about 5,000 SmartDesks in fiscal 2019, thus generating an estimated $25 million in new revenue at over 30% gross margins.

In March 2018, Cemtrex acquired 46% of security technology developer Vicon, a company with a 50-year track record and annual revenues of roughly $26 million. 

Results of Fiscal 2018: 

Sales: Net sales for the 12 months ending September 30, 2018 were $89,936,519 as compared to $120,628,299 for the 12-month period ending September 30, 2017, a decrease of 25%.

Cemtrex’s advanced technology (AT) segment revenues were $1,765,106 in the fiscal year ending September 30, 2018, compared to no revenue in the fiscal year ending September 30, 2017. The Company’s AT division markets software development services, and these revenues in fiscal year 2018, do not contain any sales from SmartDesks. The Company began taking reservations for the SmartDesk in May 2018, with most customers starting to receive delivery of the SmartDesk in the second quarter of fiscal 2019. The Company has received a total number of 815 reservations for SmartDesk as of December 15, 2018. The Company expects to convert these reservations into orders and thus sales in fiscal 2019.

The electronics manufacturing (EM) segment revenues in fiscal 2018 decreased by $11,527,951, or 18%, to $52,530,983 from $64,058,934 for fiscal year 2017. The primary reason for the decrease was the loss of two customers, one as a result of their consolidation and the other due to the obsolescence of their product. However, currently, the Company’s EM backlog is approximately $52 million, and the Company expects sales to grow in this segment over the next 12 months.

The industrial technology (IT) segment revenues in fiscal 2018 decreased by $20,928,836, or 37%, to $35,640,430 from $56,569,266 for fiscal 2017. This decrease was primarily due to the decrease in demand for environmental control products as a result of the relaxation of environmental regulations by the current administration and globally.

Research and Development (R&D) Expenses: The Company invested heavily in research and development, incurring R&D expenses of $5,558,682 in fiscal 2018. The Company had no R&D expenses in fiscal 2017. The Company plans to spend approximately $1.5 million on R&D during fiscal 2019 to increase the depth as well as range of its offering in “smart” products and virtual reality applications.

Gross Profit: Gross profit for the fiscal year ending September 30, 2018 was $31,385,257, or 35% of revenues, as compared to gross profit of $39,913,552, or 33% of revenues, for the fiscal year ending September 30, 2017. The increase in gross profit percentage in the year ending September 30, 2018, as compared to the previous year, was a direct result of products and services with higher profit margins. 

Adjusted EBITDA: Adjusted EBITDA (non-GAAP) was $1,658,438 for the fiscal year ending September 30, 2018 as compared to $8,455,477 for the fiscal year ending September 30, 2017.

Net Loss: The net loss for the 12 months ending September 30, 2018 was $10,945,717 as compared to a net income of $4,389,915 for the 12-month period ending September 30, 2017. 

Earnings per share: Earnings per share for the 12 months ending September 30, 2018 were ($1.06) as compared to $0.31 for the 12-month period ending September 30, 2017.



Suggested Items

Discover the Benefits of a Technology Center

10/23/2019 | Barry Matties, I-Connect007
Nico Fahrner, application engineer at Rehm Thermal Systems, talks with Barry Matties about the benefits prospective customers get from being able to fully test their systems in-line at Rehm’s technology centers before purchasing.

Solder Mask Evolves into a Truly Additive Process

09/09/2019 | John Fix, Taiyo America Inc.
The 5G era is creating quite a bit of work for many PCB engineers as the materials required to keep up with the speed, frequency, and latency requirements need to be defined and qualified. Solder mask, for example, now becomes a truly additive process. Read on to find out how and why.

Recent Advances in X-ray Technology: SMTA Webinar Recap

08/12/2019 | Pete Starkey, I-Connect007
Technical Editor Pete Starkey recently attended a webinar on advances in X-ray technology and its applications in the electronics industry, as presented by Keith Bryant, Chair of SMTA Europe, on behalf of SMTA India. Here are the highlights of the webinar.

Copyright © 2020 I-Connect007. All rights reserved.