Techcon Brings Smart Dispensing Robots to IPC APEX EXPO 2019


Reading time ( words)

Techcon plans to exhibit in booth #1314 at the IPC APEX EXPO 2019, scheduled to take place January 29-31, 2019 at the San Diego Convention Center. The company will showcase its TSR2000 Smart Dispensing Robots, TS8100-100 PC Pump with new controller, and TS5000DMP-DCX valve.

TSR2000 Series Smart Dispensing Robots are designed specifically for precise fluid dispensing applications and are compatible with all valve types and controllers. The user-friendly, smart PC-based software make the robots easy to program and simple to operate.

From a general assembly manufacturer looking to automate an existing dispensing application, to an engineer designing a production process from the very beginning, Techcon Systems dispensing robots offer unsurpassed value in automated precision fluid dispensing. The basic dispensing robot series are available in three platforms:

  • TSR2201: 200mm X 200mm 
  • TSR2301: 300mm X 300mm 
  • TSR2401: 400mm X 400mm

TS8100-100 Positive Displacement PC Pump is a continuously volumetric pump volumetric dispense designed based on Progressive Cavity (PC) technology. The pump can accurately dispense a wide range of fluids, from low viscosity coatings to high viscosity greases. The TS580R is a Smart PC Pump controller capable of controlling the Techcon TS8100 series PC Pump. With a universal power supply, it is a fully ‘plug and play' system and can be used immediately, anywhere in the world.

The TS5000DMP-DCX is a Disposable Material Path Rotary Valve Equipped

with a quick access hinged door, for rapid feed-path replacement. Techcon’s patented disposable material path (DMP) valve contains a disposable feed screw for easy maintenance and reliable dispensing. With the feed screw made of Delrin, the valve is designed for use with two-compound and UV fluids.

Company representatives also will show Techcon’s line of consumables, which includes dispensing tips, syringes, cartridges and nozzles. To learn more about Techcon, visit Booth #1314 at the IPC APEX EXPO 2019.

Share

Print


Suggested Items

Data: Key to Automating Right the First Time

06/14/2019 | Barry Matties, I-Connect007
Michael Ford, senior director of emerging industry strategy, reflects on his first two years with Aegis Software Corporation and looks to the future of the data-driven manufacturing environment. Michael shares how the CFX and data collection model can play an important role in the streamlining processes, including Industry 4.0 and the supply chain.

The Effectiveness of 75% IPA/25% DI Extraction Solution on No-clean Flux Residues

06/13/2019 | David Lober and Mike Bixenman, DBA, KYZEN; and Marietta Lemieux and Mark McMeen, STI
The continuous challenge in the electronics industry is to keep up with the demand for smaller, faster, and more reliable electronics. When it comes to cleaning, this rapid development of manufacturing and reliability challenges is juxtaposed with the slow pace of new test method development.

What Electronics Companies Need to Know About Environmental Product Requirements

06/12/2019 | Kelly Scanlon, IPC Director of Environment, Health and Safety Policy and Research
The task of monitoring and complying with environmental, health and safety (EHS) rules that affect electronics companies and their products requires a watchful eye on all levels of government: local, state, national, and international.



Copyright © 2019 I-Connect007. All rights reserved.