Thermaltronics to Demo Full-Vision Soldering Robot at IPC APEX EXPO


Reading time ( words)

Thermaltronics USA, Inc. plans to exhibit in Booth #3049 at the IPC APEX EXPO 2019, scheduled to take place January 29-31, 2018 at the San Diego Convention Center in California. The company will be running live demos of its award-winning solder robot. The success of the TMT-R9800S Solder Robot has driven the development of a larger “in line” version that will be launched later in 2019.

A spokesman for Thermaltronics said that, “Pressure from large EMS companies who want to integrate the solder robot into their SMT production lines will result in improvements in quality and throughput time for those applications where selective or wave soldering is not a solution.” In addition to the solder robot, Thermaltronics will be exhibit its full line of hand soldering products, including a new dual port operating system that will be launched in May 2019.

The soldering robot has an observation mode, a verification mode and decision-making capabilities. This capability to collect and utilize data for production processing is one of the most important factors necessary to meet the requirements of Industry 4.0 standards.

Thermaltronics Curie Heat Technology (CHT) responds to the thermal demands of each solder joint by adjusting the power instantaneously, thereby meeting the exact requirements of the substrate component and solder material. The company’s hand soldering products include both 13.56 MHz and 470 KHz power supplies and are fully compatible with competitive product offerings.

In addition to the hand soldering product line, Thermaltronics also provides an extended range of accessories to support both production and rework applications.

Share

Print


Suggested Items

'Coatings Uncoated!' Webinar Series and Automotive Industry Trends

04/03/2020 | Real Time with...IPC
Phil Kinner, global business/technical director of Electrolube’s coatings division, tells Pete Starkey about the positive impact of the “Coatings Uncoated!” webinar series and comments on how the company has responded to the changes in the focus of the automotive industry.

This Month in SMT007 Magazine: Exclusive Interview With Burt Rutan, Aerospace Legend

04/03/2020 | I-Connect007 Editorial Team
If you follow advancements in aerospace technologies and expeditions, then you know the name Burt Rutan. Described by Newsweek as “the man responsible for more innovations in modern aviation than any living engineer,” Rutan is a bold visionary with a passion for the advancement of technology, who has designed 46 aircraft throughout his career. Following his IPC APEX EXPO keynote presentation, Rutan stopped by the I-Connect007 booth and shared his thoughts on a wide variety of topics.

Siemens and Valor: Two Complementary DFM Technologies

04/01/2020 | Andy Shaughnessy, I-Connect007
Before IPC APEX EXPO kicked off, Andy Shaughnessy attended a Siemens seminar in San Diego on smart manufacturing for electronics and the integration of technologies from Siemens’ digital industry software and Valor. Afterward, Andy spoke with Andy Farrington, director of portfolio development for the Americas, about the event, as well as some of the hot topics and solutions that the speakers addressed.



Copyright © 2020 I-Connect007. All rights reserved.