BTU to Debut Aqua Scrub Flux Management Tech at IPC APEX EXPO 2019


Reading time ( words)

BTU International, Inc. will exhibit at the IPC APEX EXPO 2019, scheduled to take place January 29-31, 2019, at the San Diego Convention Center in California. The company will introduce the Aqua Scrub flux management technology installed on the PYRAMAX 150N in booth #1501.

Aqua Scrub Technology is BTU’s next generation solder reflow flux management system. The patent-pending design uses an aqueous-based scrubber technology compatible with most known paste and flux types. The flux and solution are automatically contained and packaged for disposal.

“We’ve been working for a long time towards a total solution for flux management. One that realizes the goals of flux independence, and a has a truly clean, hands-off maintenance approach,” said Peter Tallian, general manager of BTU International.  “With Aqua Scrub we can say we’ve achieved these goals, which will ultimately result in a competitive advantage for our customers.”

The Aqua Scrub has a very attractive cost of ownership and is designed to decrease operational cost by 4X over traditional condensation systems. Reduction in cost can be attributed to reduced downtime, labor and disposal costs.

The Aqua Scrub is purpose-built as a stand-alone system that can be easily retrofitted on PYRAMAX reflow ovens already in the field as well as being configured on new PYRAMAX ovens. This self-contained unit mounts on the back side of the oven to minimize the impact on oven operation and factory floor space.

Share

Print


Suggested Items

The Effectiveness of 75% IPA/25% DI Extraction Solution on No-clean Flux Residues

06/13/2019 | David Lober and Mike Bixenman, DBA, KYZEN; and Marietta Lemieux and Mark McMeen, STI
The continuous challenge in the electronics industry is to keep up with the demand for smaller, faster, and more reliable electronics. When it comes to cleaning, this rapid development of manufacturing and reliability challenges is juxtaposed with the slow pace of new test method development.

Reflow Your Solder and Your Data for Industry 4.0

06/11/2019 | Nolan Johnson, I-Connect007
I-Connect007 Managing Editor Nolan Johnson recently spoke with KIC President and Founder Phil Kazmierowicz and Manager of Applications and Sales MB “Marybeth” Allen as they each transitioned into new roles in the KIC leadership team. The conversation ultimately turned to the current dynamics in the industry, particularly Industry 4.0 and streamlining processes.

Laserssel Brings High-speed Soldering to New Application Areas

06/10/2019 | Barry Matties, I-Connect007
In this interview with I-Connect007, Denis Barbini, general manager of Laserssel, talks about the company's new laser-selective reflow solution aimed at reducing a typical reflow oven’s 10-minute cycle down to just 10 seconds as well as the overall benefits manufacturers could see from streamlining this process.



Copyright © 2019 I-Connect007. All rights reserved.