Saki to Demo 3D SPI, AOI, AXI, and 2D Bottom-side AOI at IPC APEX EXPO


Reading time ( words)

Saki Corporation will present its 3D solder paste inspection (SPI), automated optical inspection (AOI), and automated x-ray inspection (AXI) systems, plus new 2D Bottom-side AOI, at IPC APEX Expo 2019, January 29-31, at the San Diego Convention Center, San Diego, California, at booth #1407. In addition, Saki's M2M communication/Industry 4.0/Smart Factory capabilities will be on display in the Fuji booth #1317 and in the Hermes/CFX production line.

Saki's 3Di Series is the fastest AOI system in the industry. It has scalable resolutions of 7µm, 12µm, and 18µm, closed-loop functionality, and a sturdy frame with a dual-drive system, resulting in accuracy, stability, and reliability.

Demonstrations of Saki's new version of Saki Self-Programming Software (SSP), the inspection industry's first self-programming software, will be given. With Saki Self-Programming Software, no programming is necessary, no golden board is needed, and programming errors are eliminated.

New at IPC APEX is Saki's 2D Bottom-side AOI System. Saki's proprietary 2D high-speed imaging technology scans an entire 460 x 510mm printed circuit board assembly in one pass, capturing its image on-the-fly, in real time, storing the image into memory, and creating inspection data for the entire board. Saki's bottom-side AOI system ensures PCB quality after dip, selective, and wave soldering. The system completely automates bottom-side inspection, including pin through-hole fillets. It's fast, cost-effective, and eliminates the need for flipping the PCB.

Saki's new 3D SPI system has a 12 megapixel camera for the fastest inspection and highest resolution with high accuracy and repeatability. It offers closed-loop functionality and 2D & 3D inspection using an LCoS imaging system. It is compatible with Saki's 3D AOI hardware and comes with Saki Self-Programming Software.

 Previews will also be given of Saki's new 3D AXI system. The system benefits from the technology advancements of Planar Computer Tomography that perfectly separates top and bottom sides of the PCB and takes continuous 3D images without joints. With a programmable resolution from 13-30µm and best-in-class Cpk and gage repeatability and reproducibility, it delivers 100% head-in-pillow detection. Saki's AXI has been employed in the semiconductor industry for inspection and measurement of insulated gate bipolar transistors (IGBTs) and land grid arrays (LGAs).

"The past year has seen lots of changes, growth, and new equipment and technologies at Saki," said Satoshi Otake, general manager of Saki America. "We are excited to share our news and developments with the electronics community.

Share

Print


Suggested Items

Industry Outlook from IPC's Sharon Starr

03/18/2019 | Patty Goldman, I-Connect007
Sharon Starr, IPC's director of market research, provides updates on the EMS and PCB industry outlook, benefits of IPC membership and participation, plans to expand the EMS statistical program, and new studies being published.

RTW IPC APEX EXPO 2019: Reducing Voiding in Reflow Soldering

03/06/2019 | Real Time with...IPC
Chris Nash, product manager for PCB assembly solder paste at Indium Corporation, speaks with Kelly Dack and highlights Indium’s take on three important aspects of reliability: thermal, mechanical, and electrical. He talks about challenges of all three aspects, which include solder voiding, and how Indium helps the industry address these issues through its solder paste formulations.

Two Full CFX Demo Lines at IPC APEX EXPO 2019

03/05/2019 | Dan Feinberg, Technology Editor, I-Connect007
During IPC APEX EXPO, Editor Dan Feinberg spoke with David Bergman, IPC VP of standards and technology, about CFX, IPC’s Connected Factory Exchange software for machine-to-machine communication. With more than companies now supporting CFX, IPC set up two full lines for demonstration at the show.



Copyright © 2019 I-Connect007. All rights reserved.