Nordson ASYMTEK to Exhibit at IPC APEX EXPO 2019


Reading time ( words)

Nordson ASYMTEK will be demonstrating large-volume and advanced dispensing, hot bar soldering, and a conformal coating line at IPC APEX EXPO 2019, San Diego, California from January 29-31, 2019, at booth 2125. Also featured will be a range of jets and valves for dispensing and coating applications, including the award-winning SC-350 Select Spray Applicator.

Experts from Nordson ASYMTEK will present two technical papers, "Dispensing EMI Shielding Materials: A Replacement for Sputtering," on January 29 at 1:30 p.m., and "Balancing Air Assisted Atomization for Improved Conformal Coating Quality," on January 31 at 10:30 a.m.

You'll see:

A new, modular conformal coating line that demonstrates process stability with consistency at each step. Coating productivity can be easily monitored, thanks to inter-machine communication between the Select Coat® SL-940 conformal coating system, the FX-942UV Series ACI/AOI automated conformal coating inspection system, and an integrated oven. Flexible configurations make it easy to create the right solution.

Nordson ASYMTEK's Vantage™ Fluid Dispensing System combined with the award-winning IntelliJet® jetting system. This dynamic duo demonstrates remarkable speed and accuracy in an expanded dispense area for applications in high-volume electronics manufacturing. New from the ground up, the Vantage dispensing system is controlled by the completely new dispensing software, Canvas™, with graphical programming and guided wizards.

The Helios™ SD-960 Series automated dispensing system, which was specifically designed for high-throughput and batch dispensing in electronics assembly for large parts and PCB substrates. It dispenses medium to bulk volumes of both single- and 2-component highly abrasive thermal interface materials (TIMs), silicones, epoxies, and grease for applications such as potting, sealing, gasketing, and structural adhesives. The system incorporates Nordson ASYMTEK's 35+ years of dispensing innovation, proven closed-loop process controls, dispense valves, user-programmable Windows-based PC with Fluidmove® software, and delivers the same unparalleled control, accuracy, repeatability, traceability, and flexibility as its micro-dispensing systems.

"Nordson ASYMTEK is pleased to show our breadth of solutions in dispensing and conformal coating," said Peter Bierhuis, president, Nordson ASYMTEK. "So, get on board and join us at IPC APEX EXPO 2019 in San Diego."

Share

Print


Suggested Items

IPC’s Shawn Dubravac: COVID-19 Outbreak Accelerates Industry Shifts Already Under Way

05/21/2020 | Barry Matties, I-Connect007
On May 19, Barry Matties spoke with Shawn Dubravac, chief economist for IPC. While discussing other topics, Matties asked for Dubravac’s perspective on shifts in the market, who observed that the recessionary trend might be behind us; the markets are already showing recovery. Still, it could take a year or so to fully recover.

Happy’s Smart Factory Protocol Primer

04/29/2020 | Happy Holden, I-Connect007
The smart factory concept is built upon data interchange as the foundation. There has been much development in the area of industrial and manufacturing data protocols over the years, stretching back into the 1960s. This article by Happy Holden surveys what are considered the most common protocols in use in the electronics manufacturing industry today, including IPC-CFX/ Hermes, OML, SECS/GEM, and MAPS.

Case Study: Example of ASKEY Applying QML Validation

04/23/2020 | Edy Yu, I-Connect007
The PCB007 China team paid a visit to the ASKEY plant in Wujiang, Jiangsu, to learn more about their QML process. In this interview with Qixian Zhang, vice GM of ASKEY’s Electronics Product Quality Assurance Department, he discusses what QML means to ASKEY and the electronics industry as a whole.



Copyright © 2020 I-Connect007. All rights reserved.