KIC and Indium to Hold Voiding Clinic at IPC APEX EXPO 2019


Reading time ( words)

KIC and Indium Corporation will hold a voiding clinic in booth #1215 at the IPC APEX EXPO 2019, scheduled to take place January 29-31 at the San Diego Convention Center.

Two of the most effective ways to reduce voiding in solder joints is to analyze the assembly process from a materials perspective and from a reflow profiling perspective. Voiding experts from both KIC and Indium Corporation will be on hand to analyze customers’ soldering processes and recommend adjustments to help them to minimize their solder joint voiding.

Customers can drop by the KIC booth anytime between 1-3 p.m. Tuesday and Wednesday, January 29-30. If those times are not convenient, they can email MB Allen at mballen@kicmail.com to make an appointment.

Indium Corporation’s award-winning Indium8.9 No-Clean Pb-free Solder Paste has been proven to avoid the void by reducing voiding to as low as 10 percent. Together with KIC’s reflow profiling systems, customers can reduce overall voiding and improve the reliability of their end product.

Share

Print


Suggested Items

June Issue of SMT007: A Snapshot of a Resilient Industry

06/30/2020 | Tamara Jovanovic, Happiest Baby
Tamara Jovanovic, an electrical engineer at Happiest Baby in Los Angeles, never imagined that I would have to take half of my lab equipment home to be able to continue doing her job. As she says in her review of the June issue of SMT007 Magazine, the entire industry is adapting to the "new normal," and ready for whatever the future brings.

IPC’s Shawn Dubravac: COVID-19 Outbreak Accelerates Industry Shifts Already Under Way

05/21/2020 | Barry Matties, I-Connect007
On May 19, Barry Matties spoke with Shawn Dubravac, chief economist for IPC. While discussing other topics, Matties asked for Dubravac’s perspective on shifts in the market, who observed that the recessionary trend might be behind us; the markets are already showing recovery. Still, it could take a year or so to fully recover.

Happy’s Smart Factory Protocol Primer

04/29/2020 | Happy Holden, I-Connect007
The smart factory concept is built upon data interchange as the foundation. There has been much development in the area of industrial and manufacturing data protocols over the years, stretching back into the 1960s. This article by Happy Holden surveys what are considered the most common protocols in use in the electronics manufacturing industry today, including IPC-CFX/ Hermes, OML, SECS/GEM, and MAPS.



Copyright © 2020 I-Connect007. All rights reserved.