Rehm to Hold Seminar in Mexico


Reading time ( words)

Rehm seminar in Mexico scheduled for mid-February What are the causes of soldering defects? And what methods can be used to avoid precisely such soldering defects? Answers to these questions will be provided at a two-day Rehm seminar to be held at the Rehm Technology Centre in Guadalajara, Mexico on February 13 and 14.  

Luis_Garcia.jpgLuis Garcia, managing director of Rehm Mexico, will present the most important news as well as Rehm's portfolio and innovations to the seminar participants. The first seminar day, dedicated entirely to reflow profiling, will then begin. Dr. Hans Bell, Head of R&D at Rehm Thermal Systems, will present the reflow profiling basics: standards, guidelines, measurement options, and factors affecting the reflow profile. The effect of process-related factors on soldering quality, such as wetting, will be examined in the afternoon.

Defect management in electronics production will be the main topic on the second day of the seminar. Dr. Hans Bell will take a look at reflow soldering defects such as solder balling/spatter or solder beading – while explaining the causes of voids and strategies to prevent these. Both seminar days will offer enough discussion time for participants to exchange specialist information. 

About Rehm Thermal Systems

As a specialist in thermal system solutions for the electronics and photovoltaics industry, Rehm is a technology and innovation leader in state of-the-art, cost-effective manufacturing of electronic assemblies. We are a globally active manufacturer of reflow soldering systems with convection, condensation or vacuum, drying and coating systems, functional test systems, equipment for the metallization of solar cells as well as numerous customized systems. We have a presence in all key growth markets and, with more than 25 years of industry experience, we are able to implement innovative production solutions that set new standards.

Share

Print


Suggested Items

The Effectiveness of 75% IPA/25% DI Extraction Solution on No-clean Flux Residues

06/13/2019 | David Lober and Mike Bixenman, DBA, KYZEN; and Marietta Lemieux and Mark McMeen, STI
The continuous challenge in the electronics industry is to keep up with the demand for smaller, faster, and more reliable electronics. When it comes to cleaning, this rapid development of manufacturing and reliability challenges is juxtaposed with the slow pace of new test method development.

Laserssel Brings High-speed Soldering to New Application Areas

06/10/2019 | Barry Matties, I-Connect007
In this interview with I-Connect007, Denis Barbini, general manager of Laserssel, talks about the company's new laser-selective reflow solution aimed at reducing a typical reflow oven’s 10-minute cycle down to just 10 seconds as well as the overall benefits manufacturers could see from streamlining this process.

Minimizing Voids in Solder Joints

06/07/2019 | Rehm Thermal Systems
Dr. Hans Bell of Rehm Thermal Systems, Henryk Maschotta of Thales Deutschland GmbH, and Dr. Heinz Wohlrabe of TU Dresden presented the results of their project on reducing void content in the solder joints of land grid arrays (LGAs) at a soldering seminar during the Technology Days of the recent SMTconnect show in Nuremberg.



Copyright © 2019 I-Connect007. All rights reserved.