Rehm Exhibited at SMTA in Mexico


Reading time ( words)

A successful conference with good organization and many interested customers: that was the SMTA 2018 in Guadalajara, Mexico. Rehm Thermal Systems presented itself with the condensation soldering machine CondensoXC, attracting many visitors to the stand.

Being close to the customer—around the globe: This is one of the principles of Rehm Thermal Systems. Also at the SMTA in Guadalajara (Mexico) in the middle of November, the specialist for thermal system solutions from Blaubeuren presented itself with one of its systems: the space-saving, yet powerful CondensoXC condensation soldering machine, which is particularly suitable for laboratory applications, small series production or prototyping.

rehm1.jpg"Mexico is an important market for us, in which almost all well-known automobile manufacturers and their suppliers are represented. Our soldering systems are well received in this and many other industries”, said Luis Garcia, branch manager of Rehm Mexico. SMTA Guadalajara was organized by the Surface Mount Technology Association, which has existed since 1984.

And the next event for Rehm Thermal Systems in Mexico is already on the agenda: On February 13th and 14th, a two-day seminar on reflow soldering, temperature profiling, soldering defects and defect management will take place at the Rehm Technology Center in Guadalajara.

About Rehm Thermal Systems

As a specialist in thermal system solutions for the electronics and photovoltaics industry, Rehm is a technology and innovation leader in state-of-the-art, cost-effective manufacturing of electronic assemblies. We are a globally active manufacturer of reflow soldering systems with convection, condensation or vacuum, drying and coating systems, functional test systems, equipment for the metallisation of solar cells as well as numerous customised systems. We have a presence in all key growth markets and, with more than 25 years of industry experience, we are able to implement innovative production solutions that set new standards.

Share

Print


Suggested Items

Flex Circuit Supply Chain Challenges

02/13/2019 | Stephen Las Marias, I-Connect007
In our recent Flex and Rigid-Flex survey, we asked the following question: "Do you have problems with your flex circuit supply chain?" Below are just a few of the explanations of those who answered "Yes", slightly edited for clarity.

RTW IPC APEX EXPO 2019: Electrolube Discusses Overcoming Secondary Cure Issues

02/13/2019 | Real Time with...IPC
Phil Kinner, technical director of Electrolube's coatings division, speaks with I-Connect007 Technical Editor Pete Starkey about how secondary cure issues with UV conformal coatings have been overcome and shows some typical examples.

RTW IPC APEX EXPO 2019: MacDermid Alpha Discusses New Materials to Improve Void Issues

01/30/2019 | Real Time with...IPC
Traian Cucu, Ph.D., G.A.T.E Group Leader at MacDermid Alpha Electronics Solutions, discusses with I-Connect007 Managing Editor Nolan Johnson some of the methods to reduce, or eliminate, the solder voiding issue, especially with the continuing trend towards lower-pitch, high-density components.



Copyright © 2019 I-Connect007. All rights reserved.