SEHO to Exhibit at the SMTA Rocky Mountain Expo


Reading time ( words)

SEHO North America, Inc. will exhibit at the SMTA Rocky Mountain Expo & Tech Forum, scheduled to take place on February 21, 2019 at the West Club at Mile High Stadium in Denver, Colorado. The company will discuss the PowerWave N2, ideally suited for medium to large production series. The system offers remarkable performance at simultaneously low investment costs. 

The PowerWave N2 features an innovative fluxer unit that reduces flux consumption remarkably and creates low maintenance requirements. The spray fluxer with HVLP technology (high volume, low pressure) ensures a stable spray jet and a very precise spray pattern even at the outer edges of the printed circuit boards (PCBs). This allows a reproducible fluxing process. Additionally, alcohol-based as well as water-based fluxes can be processed without any problems.

The flexible preheating zone configuration with an active length of 1800mm (70.86") enables the system to be customized to specific production needs. Depending on the requirements, the PowerWave N2 may be equipped with infrared heating zones, immediately reacting quartz emitters, or with convection heating modules.

Share

Print


Suggested Items

Mirtec's Approach to Raw Data: The 'Sushi Principle'

12/09/2019 | Real Time with...productronica
Editor Pete Starkey and Brian D’Amico discuss the company’s new Alpha system, designed for the automotive market. D’Amico explains why Mirtec is focusing on providing customers with raw data instead of “cooked” data, what he terms the “sushi principle.” He says that the system is able to pick up tiny defects that would otherwise be filtered away if the system were not using raw data. D’Amico also discusses their use of artificial intelligence, and some of the possible benefits from using AI going forward.

Discover the Benefits of a Technology Center

10/23/2019 | Barry Matties, I-Connect007
Nico Fahrner, application engineer at Rehm Thermal Systems, talks with Barry Matties about the benefits prospective customers get from being able to fully test their systems in-line at Rehm’s technology centers before purchasing.

Advice to OEM System Designers

02/20/2019 | I-Connect007 Research Team
In a recent I-Connect007 survey, we asked the following question: "What advice would you give an OEM system designer?" Here are just a few of replies, slightly edited for clarity.



Copyright © 2019 I-Connect007. All rights reserved.