Rehm’s ProtectoXP Offers 2K Encapsulation


Reading time ( words)

In modern electronics manufacturing it remains important to protect sensitive assemblies from external influences—reliably, safely and as well as possible. Yet continuing development and miniaturization in electronics are creating ever more complex assemblies that call for an even more precise level of protection. With the ProtectoXP, Rehm Thermal Systems offers a lacquering system with the option of 2K encapsulation for a particularly high level of protection.

Corrosion, moisture and vibration are just some of the hazards that can cause damage to an assembly from outside. To protect individual components or indeed the entire assembly, however, these can be coated with a protective lacquer after soldering. Selective, automatic coating of electronic assemblies with a protective lacquer, a process known as ‘conformal coating’, offers numerous possibilities here.

rehm2.jpgThe Protecto lacquering systems from Rehm Thermal Systems, for example, have multifunctional lacquer applicator units that can apply the lacquer by spraying, dispensing or jet, to suit the application—even in narrow gaps between components. For the ProtectoXP there is a wide range of applicators available, through which it is possible to select the right equipment for the corresponding application and thus always to achieve the best possible result. From these applicators up to four can be used simultaneously, for example the 2K system.

In this volumetric dosing system, two different material components—irrespective of whether they are high or low in viscosity—are applied uniformly and without pulsation, and independently of any fluctuations in pressure, temperature or viscosity. A 2K encapsulation of this kind is always used when a particularly high level of protection is required. The volumetric operating principle of the applicators ensures that the correct quantity of material in the correct mixing ratio is delivered every time, irrespective of temperature or fluctuations in pressure.

About Rehm Thermal Systems

As a specialist in thermal system solutions for the electronics and photovoltaics industry, Rehm is a technology and innovation leader in state-of-the-art, cost-effective manufacturing of electronic assemblies. As a globally active manufacturer of reflow soldering systems with convection, condensation or vacuum, drying and coating systems, functional test systems, equipment for metallisation of solar cells as well as numerous customised systems, we have a presence in all key growth markets and, as a partner with more than 25 years of industry experience, are able to implement innovative production solutions that set new standards.

Share

Print


Suggested Items

Tips & Tricks: Water Contamination and Flux Expiry

04/17/2019 | Jason Fullerton, MacDermid Alpha Electronics Solutions
Solder joints that form properly are not expected to exhibit reduced reliability. However, a higher number of defects created tends to lead to a higher chance that defective connections escape detection through inspection and functional testing, and that’s not a risk to be taken lightly.

Top 10 Most-Read SMT007 Articles for March

04/01/2019 | I-Connect007
Starting this month, we will take a look back at the most popular SMT007 news, articles, interviews, and columns over the past 30 days. For the month of March, these are the top 10 most-read SMT007 articles. Check them out.

Jennie Hwang: Get Ready for Disruptive Technologies

03/27/2019 | Nolan Johnson, I-Connect007
At IPC APEX EXPO 2019, Dr. Jennie S. Hwang, a columnist, author, and all-around an expert in PCB assembly, discusses some of the changes she has seen since joining the industry, and disruptive technologies that technologists we are going to have to face in the near future. Are you ready for the future?



Copyright © 2019 I-Connect007. All rights reserved.