IPC Names Rising Star Awardees at IPC APEX EXPO 2019


Reading time ( words)

In recognition of their leadership and contributions to IPC and the electronics industry within the past five years, IPC presented IPC Rising Star awards to Milea Kammer, Ph.D., Honeywell Aerospace; Matt Kelly, IBM;  Hans-Peter Tranitz, Ph.D., Continental Automotive, GmbH; and MaryAlice Gill, Jabil Circuit at IPC APEX EXPO 2019

The IPC Rising Star award is given to individuals who have shown significant leadership ability in the past five years, making an impact on IPC and the electronics industry because of their support for IPC standards, education, advocacy and solutions to industry challenges.

Dr. Milea Kammer, a materials engineering technical manager at Honeywell Aerospace, is the co-chair for the IPC J-STD-001 committee, and a regular contributor on the Pb-Free Electronics Risk Management (PERM) Council. She is driving the industry toward incorporation of new technology requirements and provides technical input for document creation and research studies.

Matt Kelly is a senior technical staff member and senior inventor with IBM Systems, Canada. Kelly currently serves on seven technical committees at IPC. He is currently is vice chair of the 5-21H Bottom Termination Components Task Group and co-chair of the 2-17 Connected Factory Initiative Subcommittee.

Hans-Peter Tranitz is head of backend technologies at Continental Automotive, GmbH, in Germany. Dr. Tranitz co-created the IPC 5-21M Cold Joining Press-fit Task Group where he serves as co-chair.

MaryAlice Gill works in the Jabal Circuit’s Nypro Consumer Health division Clothing+ team. She is an active member of both the IPC D-70 E-Textiles Committee and IPC D-60 Printed Electronics Committee. She serves as vice-chair of the IPC Printed Electronics Terms and Definitions Task Group and co-chair of the D-71: E-Textiles Joining and Interconnection Techniques Subcommittee.

“IPC is fortunate to have MaryAlice, Milea, Hans-Peter and Matt sharing their skills and expertise with us,” said John Mitchell, IPC president and CEO. “Their input, knowledge and innovative approach is a benefit to IPC and to the industry at large.”

Share

Print


Suggested Items

UV-curable Materials and Conformal Coatings

12/23/2019 | Pete Starkey, I-Connect007
Pete Starkey and Phil Kinner, global business and technical director, coatings division, Electrolube, discuss the characteristics and benefits of the company’s new UV-cured conformal coatings. Phil also describes the development of coatings for critical avionics applications and Electrolube’s collaboration with the U.K. National Physical Laboratory to establish a new condensation test.

Reliability Testing in Automotive and Digital Factories

12/11/2019 | Barry Matties, I-Connect007
Barry Matties spoke with Gen3’s Andrew Naisbitt about what readers should know about SIR and CAF testing, what to consider if you’re thinking of bringing it in-house, and how reliability testing fits into automotive and the digital factory.

André Bodegom on European Challenges, Automation, and Automotive

12/02/2019 | Pete Starkey, I-Connect007
Editor Pete Starkey speaks with André Bodegom, managing director for Adeon Technologies in the Netherlands, about changes he has seen over the years in major industry sectors, challenges in the European market, and other areas of growth.



Copyright © 2020 I-Connect007. All rights reserved.