Indium Features Unique Metal Thermal Interface Materials at Semi-Therm 2019


Reading time ( words)

Indium Corporation will feature its unique solid/liquid hybrid metal thermal interface materials — m2TIM — during the Semi-Therm 35th Annual Symposium & Exhibit, March 18-22, San Jose, California, USA.

Indium Corporation’s m2TIM combines liquid metal with a solid metal preform to provide reliable thermal conductivity for heat dissipation without the need for a solderable surface. The presence of a solid solder preform absorbs and contains the liquid alloys while improving thermal conductivity.

Available in InGa and InGaSn, this m2TIM hybrid approach provides extraordinary wetting ability to both metallic and non-metallic surfaces and low interfacial resistance. It also eliminates the risk of pump-out of the liquid alloy.

Presentations and posters will be available at the show to give you more in-depth information about this unique product. Please visit Indium Corporation at booth #405 to talk with their experts.

About Indium Corporation

Indium Corporation is a premier materials manufacturer and supplier to the global electronics, semiconductor, thin-film, and thermal management markets. Products include solders and fluxes; brazes; thermal interface materials; sputtering targets; indium, gallium, germanium, and tin metals and inorganic compounds; and NanoFoil. Founded in 1934, the company has global technical support and factories located in China, Malaysia, Singapore, South Korea, the United Kingdom, and the USA.

Share




Suggested Items

Passing the Test With SMTA’s Rob Boguski

09/14/2022 | Andy Shaughnessy, I-Connect007
I recently spoke with Rob Boguski, president of Fremont, California-based Datest and an SMTA vice president and board member. Rob explained why today’s test customers are asking for more information than the traditional pass/fail, offers a preview of SMTA International, and gives an update on SMTA’s planning strategy for the next five years.

Four Silver Linings in the Stormy Clouds of Pandemic, Supply Chain, and Inflation

09/14/2022 | Dr. Ronald C. Lasky, Indium Corp.
It may be difficult to see any bright spots in the current and recent economic situation. We have all experienced the devastation of the pandemic, supply chain issues, and most recently, inflation. However, as a senior technologist for an international materials supplier (Indium Corporation) and a professor of engineering at an Ivy League research university (Dartmouth College), I offer these four silver linings for those of us in the electronics industry.

Solder Paste Printing and Optimizations for Interconnecting Back Contact Cells

07/26/2022 | Narahari S Pujari and Krithika PM, MacDermid Alpha Electronics Solutions
The interdigitated back contact (IBC) is one of the methods to achieve rear contact solar cell interconnection. The contact and interconnection via rear side theoretically achieve higher efficiency by moving all the front contact grids to the rear side of the device. This results in all interconnection structures being located behind the cells, which brings two main advantages. First, there is no frontside shading of the cell by the interconnection ribbons, thus eliminating the need for trading off series resistance, losses for shading losses when using larger interconnection ribbons. Second, a more homogeneous looking frontside of the solar module enhances the aesthetics.



Copyright © 2022 I-Connect007. All rights reserved.