RTW IPC APEX EXPO 2019: Enabling Complete Automation for Customers


Reading time ( words)

Steve Williams and Saki CEO Norihiro Koike discuss Saki's AOI equipment and complete solution for electronic manufacturers, the industry-leading accuracy of their 3D equipment, and their recent Panasonic IoT certification to provide process data back to the pick-and-place equipment.

Koike also talks about how they enable complete automation for their customers.

To watch the interview, click here.

Share

Print


Suggested Items

Selecting the Proper Flex Coverlayer Material

09/06/2019 | Dave Lackey, American Standard Circuits
Coverlayers are polymer materials used to cover and protect the copper traces of the flex circuit product. There are a number of different options available for protecting the circuits, and they serve different design requirements in terms of cost, performance, and flexural endurance optimization. When specifying the choice, it is critical to call out not just the type of coverlayer material but also the thickness requirement. This can be very important in certain types of constructions, especially when a flex circuit will experience dynamic flexing during use.

Dispensing EMI Shielding Materials: An Alternative to Sputtering

08/23/2019 | Garrett Wong, Nordson Asymtek and Jinu Choi, Henkel Electronic Materials Llc
Shielding electronic systems against EMI has become a hot topic. Technological advancements toward 5G standards, wireless charging of mobile electronics, in-package antenna integration, and SiP adoption are driving the need to apply more effective EMI shielding and isolation to component packages and larger modules. For conformal shielding, EMI shielding materials for exterior package surfaces have mostly been applied with a PVD process of sputtering, leveraging front-end packaging technologies to back-end packaging applications.

3D Optical Inspection Provides ‘Eyes’ for Process Improvements in Industry 4.0

06/21/2019 | Jenny Yuh, Koh Young Technology, and Brent Fischthal, Koh Young America
Automated 3D solder paste inspection (SPI) and 3D automated optical inspection (AOI) systems have become an integral part of the printed circuit board assembly (PCBA) process because they help ensure high-quality production. As today’s board complexity is increasing, inspection technology has become even more critical.



Copyright © 2019 I-Connect007. All rights reserved.