RTW IPC APEX EXPO 2019: Electrolube Discusses Overcoming Secondary Cure Issues


Reading time ( words)

Phil Kinner, technical director of Electrolube's coatings division, speaks with I-Connect007 Technical Editor Pete Starkey about how secondary cure issues with UV conformal coatings have been overcome and shows some typical examples.

To watch the interview, click here.

Share

Print


Suggested Items

Solder Mask Evolves into a Truly Additive Process

09/09/2019 | John Fix, Taiyo America Inc.
The 5G era is creating quite a bit of work for many PCB engineers as the materials required to keep up with the speed, frequency, and latency requirements need to be defined and qualified. Solder mask, for example, now becomes a truly additive process. Read on to find out how and why.

Recent Advances in X-ray Technology: SMTA Webinar Recap

08/12/2019 | Pete Starkey, I-Connect007
Technical Editor Pete Starkey recently attended a webinar on advances in X-ray technology and its applications in the electronics industry, as presented by Keith Bryant, Chair of SMTA Europe, on behalf of SMTA India. Here are the highlights of the webinar.

Advancement of SPI Tools to Support Industry 4.0 and Package Scaling

08/06/2019 | A. Prasad, L. Pymento, S.R. Aravamudhan, and C. Periasamy, Intel Corp.
This paper evaluates the current state of inline SPI tools from multiple vendors for solder paste measurement accuracy and capability. It discusses a measurement capability analysis that was carried out against a golden metrology tool across a range of volume deposits, and highlights the results from the study.



Copyright © 2019 I-Connect007. All rights reserved.