AIM’s Derek Wang to Present at 2019 Fourth Customer Exchange Seminar in Beijing


Reading time ( words)

AIM Solder announced that Derek Wang will present at the 2019 Fourth Customer Exchange Seminar at Dahongmen International Exhibition Center in Beijing held by Beijing CR Technology, Ltd. Derek’s presentation, “An Update on High Reliability Lead-Free Solder Alloys,” scheduled for Wednesday, February 27, 2019 at 3:10 p.m. will highlight AIM’s high-reliability alloys – REL22 and REL61.

The presentation will cover the effects – environmental, thermal cycling and mechanical – on the functionality of electronic devices. The shortcoming of SAC alloys will be reviewed and how the new novel multicomponent solder alloy can be a good solution for harsh and demanding applications. REL61 and REL22 lead-free solder alloys have been developed to meet the demands of the evolving solder market.

About the Presenter

Derek Wang is a technical support manager for AIM Solder. He is an SMTA Certified Engineer and also serves as an SMT Process Trainer. With over fourteen years’ experience in the SMT industry, Derek supports AIM customers in Eastern China.

About AIM

Headquartered in Montreal, Canada, AIM Solder is a leading global manufacturer of assembly materials for the electronics industry with manufacturing, distribution and support facilities located throughout the world. AIM produces advanced solder products such as solder paste, liquid flux, cored wire, bar solder, epoxies, lead-free and halogen-free solder products, and specialty alloys such as indium and gold for a broad range of industries. A recipient of many prestigious SMT industry awards, AIM is strongly committed to innovative research and development of product and process improvement as well as providing customers with superior technical support, service and training.

Share

Print


Suggested Items

Comparing Soldering Results of ENIG and EPIG Post-steam Exposure

09/11/2019 | Jon Bengston and Richard DePoto, Uyemura International USA
Electroless nickel immersion gold (ENIG) is now a well-regarded finish used to enhance and preserve the solderability of copper circuits. Electroless palladium immersion gold (EPIG), meanwhile, is a new surface finish also for enhancing and preserving solderability—but with the advantage of eliminating electroless nickel from the deposit layer. This feature has become increasingly important with the increasing use of high-frequency PCB designs whereby nickel’s magnetic properties are detrimental.

Solder Mask Evolves into a Truly Additive Process

09/09/2019 | John Fix, Taiyo America Inc.
The 5G era is creating quite a bit of work for many PCB engineers as the materials required to keep up with the speed, frequency, and latency requirements need to be defined and qualified. Solder mask, for example, now becomes a truly additive process. Read on to find out how and why.

Selecting the Proper Flex Coverlayer Material

09/06/2019 | Dave Lackey, American Standard Circuits
Coverlayers are polymer materials used to cover and protect the copper traces of the flex circuit product. There are a number of different options available for protecting the circuits, and they serve different design requirements in terms of cost, performance, and flexural endurance optimization. When specifying the choice, it is critical to call out not just the type of coverlayer material but also the thickness requirement. This can be very important in certain types of constructions, especially when a flex circuit will experience dynamic flexing during use.



Copyright © 2019 I-Connect007. All rights reserved.