AIM to Participate in SMTA Dallas Expo and Tech Forum


Reading time ( words)

AIM Solder announce their participation in the upcoming SMTA Dallas Expo and Tech Forum taking place on March 19, 2019 at Plano Event Center in Plano, Texas. AIM Solder will highlight its REL electronic solders and its new RX18 and CX18 cored solder wire.

REL22TM is an award-winning, high reliability alloy developed to address reliability and production quality issues common to similar multi-element alloys.  Both internal and customer testing has proven that REL22 improves product survival in extreme thermal exposure operating environments such as under-hood automotive, avionics/aerospace and LED lighting. REL61TM is ideally suited for industries which require a cost effective alternative to SAC305 with no loss of processing performance or durability.  REL61 provides significant advantages over other no-low silver alloys by offering better flow characteristics at lower temperatures, thus reducing PCB damage and assembly costs.

AIM will also feature its new cored wire solders, RX18 and CX18. The award-winning RX18 is engineered for automated soldering and promotes thermal transfer, fast wetting and reduces voids/skips.  With an operator friendly, low odor/smoke formula, CX18 extends the solder tip life and leaves clear, minimal residues.

To discover all of AIM’s products and services, visit the company at the SMTA Dallas Expo and Tech Forum for more information and to speak with one of AIM’s knowledgeable staff members.

About AIM

Headquartered in Montreal, Canada, AIM Solder is a leading global manufacturer of assembly materials for the electronics industry with manufacturing, distribution and support facilities located throughout the world. AIM produces advanced solder products such as solder paste, liquid flux, cored wire, bar solder, epoxies, lead-free and halogen-free solder products, and specialty alloys such as indium and gold for a broad range of industries. A recipient of many prestigious SMT industry awards, AIM is strongly committed to innovative research and development of product and process improvement as well as providing customers with superior technical support, service and training.

Share

Print


Suggested Items

The Effectiveness of 75% IPA/25% DI Extraction Solution on No-clean Flux Residues

06/13/2019 | David Lober and Mike Bixenman, DBA, KYZEN; and Marietta Lemieux and Mark McMeen, STI
The continuous challenge in the electronics industry is to keep up with the demand for smaller, faster, and more reliable electronics. When it comes to cleaning, this rapid development of manufacturing and reliability challenges is juxtaposed with the slow pace of new test method development.

Reflow Your Solder and Your Data for Industry 4.0

06/11/2019 | Nolan Johnson, I-Connect007
I-Connect007 Managing Editor Nolan Johnson recently spoke with KIC President and Founder Phil Kazmierowicz and Manager of Applications and Sales MB “Marybeth” Allen as they each transitioned into new roles in the KIC leadership team. The conversation ultimately turned to the current dynamics in the industry, particularly Industry 4.0 and streamlining processes.

Laserssel Brings High-speed Soldering to New Application Areas

06/10/2019 | Barry Matties, I-Connect007
In this interview with I-Connect007, Denis Barbini, general manager of Laserssel, talks about the company's new laser-selective reflow solution aimed at reducing a typical reflow oven’s 10-minute cycle down to just 10 seconds as well as the overall benefits manufacturers could see from streamlining this process.



Copyright © 2019 I-Connect007. All rights reserved.