Zero Defects International Relocates to Larger Facility

Reading time ( words)

Zero Defects International (ZDI) has announced a move to a new location with greater space to handle additional  products and services. This facility is also in Silicon Valley and is near the current site on O'Toole Way in San Jose. The address is 898-B Faulstitch Ct, San Jose 95112.

Among the equipment that will be installed for demonstration purposes is a Viscom X-Ray printed circuit assembly (PCBA) inspection system as well as Taiyo printed circuit board (PCB) automatic final surface inspection equipment. Other equipment will be added in the months ahead.

In addition to performing PCBA flying-probe test services, ZDI is a manufacturer's sales representative for leading international suppliers of ICT and flying-probe test systems, Europlacer pick and place equipment, Viscom X-Ray and AOI inspection machines, Epoch functional test devices, Landrex ICT and functional test fixtures, Taiyo automated and manual PCB final surface checking machines, Tagarno digital microscopes for inspecting PCBAs, and Skyla PCB and PCBA CAM services.



Suggested Items

Impact of Stencil Foil Type on Solder Paste Transfer Efficiency for Laser-cut SMT Stencils (Part 1)

04/24/2019 | Greg Smith, BlueRing Stencils
As innovation and demand continue to drive miniaturization in electronics, manufacturers face the constant challenge of assembling smaller and smaller components with repeatable processes and high yields. Stencil printing is the first step in the PWB assembly process, and improvements to the SMT stencil can significantly improve yields, especially for more challenging miniaturized products.

Mentor and Seica Partner for Data Prep and Testing Big Boards

01/18/2019 | Pete Starkey, I-Connect007
Mark Laing, business development manager of the Valor division at Mentor, a Siemens company, and Luca Corli, director of sales at Seica, speaks with I-Connect007 Technical Editor Pete Starkey about the partnership between their two companies, which enables efficient data preparation for testing big boards, and accelerates new product introduction (NPI) cycles.

Solder Paste Selection/Qualification

01/16/2019 | Stephen Las Marias, I-Connect007
In a recent SMT007 survey, we asked the following question: " What are your challenges when it comes to solder paste selection/qualification?" Here are just a few of the replies, slightly edited for clarity.

Copyright © 2019 I-Connect007. All rights reserved.