RTW IPC APEX EXPO 2019: iNEMI on Next-generation Soldering


Reading time ( words)

Grace O’Malley, VP of technical operations at iNEMI, and Editor Nolan Johnson discuss the next-generation soldering buzz session workshop hosted by iNEMI at IPC APEX EXPO 2019 and the upcoming bi-annual technology roadmap that will be released this spring.

To watch this interview, click here.

Share

Print


Suggested Items

Nate Ramanathan on Choosing a Prototype Partner and Production Supplier

03/12/2019 | Nolan Johnson, I-Connect007
AEye, a developer of perception systems for autonomous vehicles, has transitioned from initial engineering development into the final design for production and manufacturing of very large quantities. In an interview with I-Connect007, Nate Ramanathan, VP of operations at AEye, speaks about the criteria and his perspective on selecting vendors.

Advice to OEM System Designers

03/06/2019 | I-Connect007 Research Team
In our previous survey, we asked the following question: "What advice would you give an OEM system designer?" Here are just a few of the replies, slightly edited for clarity.

RTW IPC APEX EXPO 2019: Advanced 3D Solder Paste Inspection Technology

02/27/2019 | Real Time with...IPC
Olivier Pirou, managing director of Vi TECHNOLOGY, provides Joe Fjelstad with an overview of the company's advanced 3D solder paste inspection technology, featuring the ability to make corrections in real time. Pirou also talks about their efforts in strengthening their inspection systems.



Copyright © 2019 I-Connect007. All rights reserved.