Indium Launches Water-Soluble, Halogen-Free Flux


Reading time ( words)

Indium Corporation has released TACFlux 066HF, a new water-soluble halogen-free (ORH0) hand soldering and rework flux.

TACFlux 066HF is compatible with typical Sn/Pb and Pb-free alloys for PCB assembly applications. TACFlux 066HF joins Indium Corporation’s versatile offering of specialty fluxes designed to provide solutions for current and evolving industry challenges. Benefits include:

  • Halogen-free per IEC 61249-2-21 test method EN14582
  • Outstanding wetting performance in air or nitrogen atmospheres
  • Shelf life of up to 6 months

About Indium Corporation

Indium Corporation is a premier materials manufacturer and supplier to the global electronics, semiconductor, thin-film, and thermal management markets. Products include solders and fluxes; brazes; thermal interface materials; sputtering targets; indium, gallium, germanium, and tin metals and inorganic compounds; and NanoFoil®. Founded in 1934, the company has global technical support and factories located in China, Malaysia, Singapore, South Korea, the United Kingdom, and the USA.

For more information about Indium Corporation, visit www.indium.com.

Share

Print


Suggested Items

Practical Implementation of Assembly Processes for Low Melting Point Solder Pastes (Part 1)

07/16/2019 | Adam Murling, Miloš Lazić, and Don Wood, Indium Corporation; and Martin Anselm, Rochester Institute of Technology
Since 2006 and the implementation of the RoHS directive, the interest in bismuth-tin solder alloys—whose melting point around 140°C is very desirable because it allows for the use of lower temperature laminate materials and reduces thermal stress on sensitive components—has only increased as the industry has searched for Pb-free alternatives to the chosen standard, SAC305, which melts at considerably higher temperatures than the incumbent tin-lead alloys.

Surface Treatment Enabling Low-Temperature Soldering to Aluminum

07/15/2019 | Divyakant Kadiwala, Averatek Corporation
An increasingly popular method to meet the need for lower cost circuitry is the use of aluminum on polyester (Al-PET) substrates. This material is gaining popularity and has found wide use in RFID tags, low-cost LED lighting, and other single-layer circuits. However, both aluminum and PET have their own constraints and require special processing to make finished circuits.

ICT or Flying Probe: Which Test Is Best for Your Assembly?

07/10/2019 | Russell Poppe, JJS Manufacturing
In-circuit test (ICT) and flying probe are two of the most popular types of automated test equipment (ATE) used in electronic printed circuit board assembly (PCBA).



Copyright © 2019 I-Connect007. All rights reserved.