PVA to Exhibit Conformal Coating Systems at the ElectronTechExpo


Reading time ( words)

PVA will exhibit at the ElectronTechExpo, scheduled to take place April 15-17, 2019 in Moscow, Russia. The company will showcase the Delta 6 conformal coating/dispensing system known for the ability to dispense the Belhim material UR231 as well as the ST100S and CAM200 manual conformal coating systems in Pavilion 3, Hall 13, Stand B535.

The ST100S is a digital shot timer used for syringe dispensing. This compact controller is an economic and ergonomic solution for improving the waste, inaccuracies, and clean up associated with many manual processes. The ST100S is ideal for chemistries packaged in syringes such as solder paste, UV adhesives, and masking material.

The ST100S has many integrated features including:

  • Digital timer with LED display and 0.001 – 99.99 second time range
  • Manual, timed, or teach modes
  • Adjustable analog vacuum suck-back for clean cycle stops
  • Integrated pressure control
  • Electric foot pedal and power cord
  • Built in regulator and gauge
  • Sample PVA needle tips / 30cc syringe and air cap
  •  9-pin serial port connection

The CAM200 is an all plastic handheld valve suitable for dispensing low to medium viscosity cyanoacrylate adhesives and anaerobic chemistries via a unique floating diaphragm process. Depressing the CAM200 finger switch allows a diaphragm to flex and permits material to flow through the valve.

The diaphragm will terminate the dispensing process as the finger switch is released. The valve’s ergonomic wand design makes handheld dispensing easier than ever. The CAM200 can be utilized in applications requiring dots, beads, encapsulation or potting.

About PVA

PVA is a global supplier of conformal coating systems, innovative fluid dispensing solutions and precision valve technology. PVA’s customer driven solutions are utilized worldwide in industries ranging from solar, semiconductor packaging, printed circuit board assembly, medical device manufacturing, and consumer electronics. Throughout the changing global manufacturing landscape, PVA remains committed to providing our customers with exceptional products and industry-leading global support.

Share

Print


Suggested Items

Blackfox Trains Veterans for Good Manufacturing Jobs

02/18/2020 | Real Time with...IPC
Blackfox Training Institute has been training manufacturing technologists for over 20 years. Based in Longmont, Colorado, Blackfox is now focused on helping veterans of our armed services transition into good jobs in the manufacturing sector. During IPC APEX EXPO 2020, Editor Nolan Johnson spoke with Blackfox CEO Al Dill about the company's veteran training programs, and how this effort is helping companies fill jobs that might otherwise go unfilled.

Solder in PCBA: Can’t Live Without It... or Can We?

02/17/2020 | Joe Fjelstad, Verdant Electronics
For most of its historical use in electronics, the solder alloy of choice was tin-lead, either an Sn60/Pb40 alloy or the Sn63/ Pb37 eutectic version of the tin-lead alloy. These two alloys were the workhorses of the industry. They were both well understood in terms of their processing and reliability—that is, until the advent of lead-free, a well-meaning but ill-conceived and poorly executed conversion, forced on the industry by the European Union in 2006.

IPC APEX EXPO 2020 Attendees Speak: Dr. Martin Anselm

02/14/2020 | I-Connect007 Editorial Team
"The biggest challenge I’ve encountered a number of different times is the migration to much larger packaging," said Dr. Martin Anselm, director of CEMA Lab. "Devices are getting much larger, and with the thousands of I/O of solder joints, and they are not just single-die, multi-chip modules in different forms or 2.5D technologies.



Copyright © 2020 I-Connect007. All rights reserved.