Murray Percival Company to Exhibit at West Penn Expo


Reading time ( words)

Murray Percival Company, the leading supplier to the Midwest's electronics industry, today announced plans to exhibit in booth #9 at the West Penn Expo & Tech Forum, scheduled to take place April 2, 2019 at the DoubleTree Monroeville in Monroeville, Pennsylvania.

Murray Percival Company will be attending in order to support some of their leading vendors including:

  • SCHUNK, the industry’s leading supplier of routing systems.
  • Cluso, top provider of SMT reel storage solutions.
  • Alpha, a full line supplier of materials used in the electronic assembly process such as solder paste, stencils, bar solder, and wire solver.
  • Apollo Seiko, a frontrunner in the automated soldering industry.

For more information on Murray Percival and their line card, stop by booth #9 at the show.

About Murray Percival

Murray Percival Company was founded in January of 1960, and subsequently incorporated in the state of Michigan as the Murray A. Percival Company. They are currently the leading supplier to the Midwest's electronics industry, offering thousands of capital and distribution products as well as the industry’s leading process enabler. www.murraypercival.com

Share

Print


Suggested Items

Practical Implementation of Assembly Processes for Low Melting Point Solder Pastes (Part 1)

07/16/2019 | Adam Murling, Miloš Lazić, and Don Wood, Indium Corporation; and Martin Anselm, Rochester Institute of Technology
Since 2006 and the implementation of the RoHS directive, the interest in bismuth-tin solder alloys—whose melting point around 140°C is very desirable because it allows for the use of lower temperature laminate materials and reduces thermal stress on sensitive components—has only increased as the industry has searched for Pb-free alternatives to the chosen standard, SAC305, which melts at considerably higher temperatures than the incumbent tin-lead alloys.

Surface Treatment Enabling Low-Temperature Soldering to Aluminum

07/15/2019 | Divyakant Kadiwala, Averatek Corporation
An increasingly popular method to meet the need for lower cost circuitry is the use of aluminum on polyester (Al-PET) substrates. This material is gaining popularity and has found wide use in RFID tags, low-cost LED lighting, and other single-layer circuits. However, both aluminum and PET have their own constraints and require special processing to make finished circuits.

Failures and Reliability in Soldering

07/09/2019 | Michael Gouldsmith and Zen Lee, Thermaltronics
The definition of failure is "the lack of success in doing or achieving something, especially in relation to a particular activity." If the activity is concerning a soldering process, such a failure can have a downstream impact far beyond the actual solder joint. In this regard, it is first necessary to understand what constitutes a good solder joint because appearance is too often deemed a success.



Copyright © 2019 I-Connect007. All rights reserved.