ZESTRON Academy to Host FREE “DI-Water vs Chemistry” Webinar


Reading time ( words)

ZESTRON will host “DI-Water vs Chemistry” on Thursday April 25from 1:30 p.m. to 2:30 p.m. EDT. This is the second installment of the 2019 ZESTRON Academy Cleaning Webinar Series. Our presenter will be electronics cleaning expert, Umut Tosun, M.S.Ch.E, application technology manager.

Webinar Abstract:

Increased component densities, reduced component sizes, lower standoff heights and a multitude of packaging configurations combine to limit the effectiveness of cleaning electronic assemblies with DI-water. This ZESTRON Academy webinar addresses cleaning agent and process alternatives to pure DI-water that result in optimal cleanliness levels and guarantee that assemblies will perform as designed.

“Do not miss out on this opportunity to contrast the effectiveness of using both DI-water and water-based, engineered cleaning agents in cleaning under low standoff components,”said Sal Sparacino, sales and marketing manager, ZESTRON.

About ZESTRON

ZESTRON is headquartered in Manassas, Virginia and operates in more than 35 countries. With eight technical centers worldwide and the industry’s most knowledgeable team of engineers focused on high precision cleaning, ZESTRON’s commitment to ensuring that its customers surpass even the most stringent cleaning requirements is without equal.

Share

Print


Suggested Items

Cavity Board SMT Assembly Challenges (Part 2)

07/03/2019 | Dudi Amir and Brett Grossman, Intel Corporation
This article describes the details of a study of assembling SiP BGA packages into a cavity. It points out the challenges involved in the board cavity design and assembly of components in a cavity. The authors discussed the board design challenge of having a cavity and defining the proper depth of the cavity to accommodate the board fabricator, the product design, and the SMT assembly.

Clean vs. No-clean Solder Process

07/03/2019 | Russell Poppe, JJS Manufacturing
Although IPC suggests clear guidelines, agreeing on the cleanliness (or otherwise) of a PCB assembly can often be a subjective and even contentious subject within the electronics manufacturing industry. If you’ve chosen to outsource your assemblies, how do you decide what to specify to your EMS partner? Find out here.

Tips & Tricks: Water Contamination and Flux Expiry

04/17/2019 | Jason Fullerton, MacDermid Alpha Electronics Solutions
Solder joints that form properly are not expected to exhibit reduced reliability. However, a higher number of defects created tends to lead to a higher chance that defective connections escape detection through inspection and functional testing, and that’s not a risk to be taken lightly.



Copyright © 2019 I-Connect007. All rights reserved.