Dymax to Exhibit at MRO Americas 2019


Reading time ( words)

Dymax Corporation will exhibit at MRO Americas in booth #2101, April 9-11, 2019 at the Georgia World Conference Center in Atlanta, Georgia. Dymax 100% solids light-curable materials are designed to address the growing industry challenges and demands in the aerospace and defense market for both OEM and MRO customers.

The company’s newest products and technologies—including hybrid UV/cationic cure camera module adhesive, peelable SpeedMask maskants, and thermal-shock resistant conformal coatings for PCB assemblies—will be featured.

Dymax light-cure solutions help manufacturers improve imaging sensors used for ground proximity, aircraft health management, surveillance, and missile guidance systems and even protect printed circuit board assemblies from the harsher conditions they must withstand. IPC approved, MIL-I-46058C, and UL listed self-extinguishing grades are available.

SpeedMask light-curable maskants replace tape, wax, lacquers, and fixtures and offer reliable protection against most surface treatment processing environments. The tenacious adhesion of SpeedMask® UV/Visible maskants seal and protect machined, ground, or polished surfaces and are solvent free, allowing manufacturing processes to go green by eliminating solvent lacquers. SpeedMask® temporary maskants are removed by incineration during heat-treat or heat-tint operations, or by peeling.

About Dymax Corporation

Dymax Corporation develops innovative oligomer, adhesive, coating, dispensing, and light-curing systems for applications in a wide range of markets. The company’s products are perfectly matched to work seamlessly with each other, providing design engineers with tools to dramatically improve manufacturing efficiency and reduce costs. Major markets include aerospace, appliance, automotive, electronics, industrial, medical device, and metal finishing.

Share

Print


Suggested Items

Process Ionic Contamination Test (PICT) Standard Roundtable With Industry Experts

04/22/2020 | I-Connect007
With standards committees set to release the first of four new test standards, industry experts discussed the process ionic contamination test (PICT) standard, which was recently approved by the IEC for publication. Roundtable participants included Teresa Rowe, senior director of assembly and standards technology at IPC, Graham Naisbitt, chairman and CEO of Gen3, Jason Keeping, corporate process development at Celestica, and Doug Pauls, principal materials and process engineer at Collins Aerospace.

SMTA Europe’s Electronics in Harsh Environments Conference and Exhibition: A Taste of Things to Come

04/14/2020 | Pete Starkey, I-Connect007
SMTA Europe’s Electronics in Harsh Environments Conference has become a must-attend annual event; unfortunately, it also became another casualty of the COVID-19 lockdown. Scheduled to take place in Amsterdam, the Netherlands, from April 21–23, 2020, it has now been postponed until December 1–3. Pete Starkey reports on a preview seminar presented by SMTA Europe.

This Month in SMT007 Magazine: Exclusive Interview With Burt Rutan, Aerospace Legend

04/03/2020 | I-Connect007 Editorial Team
If you follow advancements in aerospace technologies and expeditions, then you know the name Burt Rutan. Described by Newsweek as “the man responsible for more innovations in modern aviation than any living engineer,” Rutan is a bold visionary with a passion for the advancement of technology, who has designed 46 aircraft throughout his career. Following his IPC APEX EXPO keynote presentation, Rutan stopped by the I-Connect007 booth and shared his thoughts on a wide variety of topics.



Copyright © 2020 I-Connect007. All rights reserved.