ZESTRON to Exhibit at SMTA Atlanta Expo


Reading time ( words)

ZESTRON will be featuring the ZESTRON EYE Mobile at the SMTA Atlanta Expo.

The ZESTRON EYE Mobile is the newest addition to the ZESTRON concentration monitoring and concentration measurement family of solutions. The ZESTRON EYE Mobile is equipment-agnostic and stores multiple chemistry profiles, so it can be used to monitor a wide range of cleaning processes ensuring optimal resource utilization in a lab or production environment.

Easy-to-use software guides users through the measuring process, providing dosing recommendations for corrections to bath concentration. Incorporating the ZESTRON EYE Mobile into any cleaning process increases production efficiency and improves traceability by documenting results with built-in digital reporting functionality.

SMTA Atlanta Expo will be held at the Atlanta Technology Park in Peachtree Corners, GA on April 11.

About ZESTRON

ZESTRON is headquartered in Manassas, Virginia and operates in more than 35 countries. With eight technical centers worldwide and the industry’s most knowledgeable team of engineers focused on high precision cleaning, ZESTRON’s commitment to ensuring that its customers surpass even the most stringent cleaning requirements is without equal.

Share

Print


Suggested Items

Automated Conformal Coating of CCAs Using Polyurethane

08/30/2019 | Marissa Pati and Ana “Lety” Campuzano-Contreras, BAE Systems
The development of an automated circuit card assembly (CCA) conformal coating process using a low-outgassing polyurethane material was essential for meeting the increase in customer demand from 3,000 to 60,000 units per year.

Cavity Board SMT Assembly Challenges (Part 2)

07/03/2019 | Dudi Amir and Brett Grossman, Intel Corporation
This article describes the details of a study of assembling SiP BGA packages into a cavity. It points out the challenges involved in the board cavity design and assembly of components in a cavity. The authors discussed the board design challenge of having a cavity and defining the proper depth of the cavity to accommodate the board fabricator, the product design, and the SMT assembly.

Clean vs. No-clean Solder Process

07/03/2019 | Russell Poppe, JJS Manufacturing
Although IPC suggests clear guidelines, agreeing on the cleanliness (or otherwise) of a PCB assembly can often be a subjective and even contentious subject within the electronics manufacturing industry. If you’ve chosen to outsource your assemblies, how do you decide what to specify to your EMS partner? Find out here.



Copyright © 2019 I-Connect007. All rights reserved.