AIM’s Dillon Zhu to Present at SMTA China East Technical Conference


Reading time ( words)

AIM Solder will present at the SMTA China East Technical Conference, scheduled to take place April 24-26, 2019 at the Shanghai World Expo Exhibition & Convention Center in Shanghai Shi, China.

Dillon’s presentation, “An Update on High Reliability Lead-Free Solder Alloys,” scheduled for Thursday, April 24, 2019 at 14:40 will cover the effects—environmental, thermal cycling and mechanical—on the reliability of solder interconnects on electronic devices. The shortcomings of SAC alloys will be reviewed and how novel multi-component solder alloys provide the PCB market with new materials for harsh and demanding applications.

You can attend Mr. Zhu’s technical discussion on Thursday, April 24, 2019 from 14:40-14:55 in Room No. 6, B2 at the SMTA China East Technical Conference in Shanghai Shi, China.

About Dillon Zhu

Dillon Zhu is Regional Technical Support Manager for AIM and, with over 15 years of experience, is an expert in SMT manufacturing. Since joining AIM in 2008, he has assisted many clients in diagnosing and correcting SMT and wave solder production challenges.

About AIM

Headquartered in Montreal, Canada, AIM Solder is a leading global manufacturer of assembly materials for the electronics industry with manufacturing, distribution and support facilities located throughout the world. AIM produces advanced solder products such as solder paste, liquid flux, cored wire, bar solder, epoxies, lead-free and halogen-free solder products, and specialty alloys such as indium and gold for a broad range of industries. A recipient of many prestigious SMT industry awards, AIM is strongly committed to innovative research and development of product and process improvement as well as providing customers with superior technical support, service and training.

Share

Print


Suggested Items

Is Your EMS Partner Up to Speed With WEEE 'Open Scope?'

10/23/2019 | Neil Sharp, JJS Manufacturing
E-waste encompasses a myriad of "unseen" metals, semi-metals, and chemical compounds that are found inside circuit boards, wires, and electrical connections. If not handled correctly, chemicals—such as cadmium, barium, lithium, lead, mercury, and beryllium—can present a significant health risk through direct contact, the inhalation of toxic fumes, or the build-up of toxins in water, soil, and food products.

Conformal Coatings

08/01/2019 | Nolan Johnson, I-Connect007
While conformal coatings may have been something of an afterthought at the front of the design process, that can no longer be the case. Conformal coatings are now a critical part of any board assembly that might be subjected to challenging conditions. But coatings can also contribute to increased mean time between failure in any conditions, even environmentally controlled environments.

Synergy Between Smart Manufacturing and the Secure Supply Chain (Part 1)

05/29/2019 | Michael Ford, Aegis Software Corp.
As MRP and ERP functions follow computing trends and start to migrate into the cloud, a fundamental question is being raised as to whether these are still the right tools to use in today’s modern Industry 4.0 driven factory, or whether these need to evolve, be enhanced, or even replaced in order to meet the more extreme requirements of operational flexibility, as well as cope with volatile material availability in the market.



Copyright © 2020 I-Connect007. All rights reserved.