Juki Hires Chris Briggs New Smart Solutions Engineer


Reading time ( words)

Juki Automation Systems (JAS), Inc. has added Chris Briggs to its service department. Based in Portland, Oregon, Briggs is the company’s newest smart solutions engineer.

Briggs joins Juki with seven years of experience as a Customer Engineer at Applied Materials, a semiconductor manufacturing equipment company.

“We’re excited to have Chris on board. He will really help us to continue to provide the high level of support we give our customers, especially in the Pacific Northwest,” said Carlos Eijansantos, director of sales & marketing at JAS, Inc.

Machine operation, service training and software classes are available to every Juki customer at no charge. Installation and on-site training is included with the purchase of every machine and performed by Juki’s highly experienced and motivated service organization that is truly dedicated to satisfying each and every customer.

About Juki Automation Systems, Inc.

Juki Automation Systems (JAS), is an international leader in high-speed SMT Assembly equipment, has shipped more than 40,000 machines worldwide since 1987.  Juki has built its global image with a combination of top-quality and high-reliability machines with a reputation for world-class service and support that result in the lowest production costs for its customers. Juki machines have about 30 percent U.S. made content by cost. The pioneer of the modular assembly system in 1993, Juki offers flexible solutions designed for both high-volume and high mix environments.  JAS, Inc. employs 45 U.S. employees, including 20 service personnel five specializing in applications sales. 

Additionally, JAS, Inc. offers a full line of SMT manufacturing products as wells as selective solder and stamp soldering machines plus Advanced Technology through-hole machines.   Juki supports one of the largest field service groups in the industry. 

Share

Print


Suggested Items

The Effectiveness of 75% IPA/25% DI Extraction Solution on No-clean Flux Residues

06/13/2019 | David Lober and Mike Bixenman, DBA, KYZEN; and Marietta Lemieux and Mark McMeen, STI
The continuous challenge in the electronics industry is to keep up with the demand for smaller, faster, and more reliable electronics. When it comes to cleaning, this rapid development of manufacturing and reliability challenges is juxtaposed with the slow pace of new test method development.

Reflow Your Solder and Your Data for Industry 4.0

06/11/2019 | Nolan Johnson, I-Connect007
I-Connect007 Managing Editor Nolan Johnson recently spoke with KIC President and Founder Phil Kazmierowicz and Manager of Applications and Sales MB “Marybeth” Allen as they each transitioned into new roles in the KIC leadership team. The conversation ultimately turned to the current dynamics in the industry, particularly Industry 4.0 and streamlining processes.

Laserssel Brings High-speed Soldering to New Application Areas

06/10/2019 | Barry Matties, I-Connect007
In this interview with I-Connect007, Denis Barbini, general manager of Laserssel, talks about the company's new laser-selective reflow solution aimed at reducing a typical reflow oven’s 10-minute cycle down to just 10 seconds as well as the overall benefits manufacturers could see from streamlining this process.



Copyright © 2019 I-Connect007. All rights reserved.