Indium Expert to Present at SMTConnect Technology Days


Reading time ( words)

Indium Corporation expert Dr. Ning-Cheng Lee, Vice President of Technology, will share his knowledge on soldering technologies at SMTConnect Technology Days English Seminar Program, May 7-9, Nuremberg, Germany. 

Dr. Lee’s full-day seminars on Wednesday, May 8, will include:

  • Solder Paste Technology Assessment for Miniaturization provides an analysis on how current solder paste technology can support the industry’s continuing miniaturization trends, such as system-in-package (SiP) and 01005 printing.
  • Achieving High-Reliability for Lead-Free Solder Joints—Materials Consideration provides participants with an understanding of how various factors can contribute to failure modes, and how to select proper solder alloys and surface finishes for achieving high-reliability.
  • DFM for Advanced Soldering, helps participants to learn how to efficiently assemble and test to save time and money.

Dr. Lee is a world-renowned soldering expert, an SMTA Member of Distinction, and an IEEE Fellow. He has extensive experience in the development of fluxes, alloys, and solder pastes for the SMT industries, and extensive experience in the development of high-temperature polymers, encapsulants for microelectronics, underfills, and adhesives. In addition to SMT and semiconductor soldering materials, his research also extends to nanobonding technology and thermal conductive materials.

About Indium Corporation

Indium Corporation is a premier materials manufacturer and supplier to the global electronics, semiconductor, thin-film, and thermal management markets. Products include solders and fluxes; brazes; thermal interface materials; sputtering targets; indium, gallium, germanium, and tin metals and inorganic compounds; and NanoFoil®. Founded in 1934, the company has global technical support and factories located in China, Malaysia, Singapore, South Korea, the United Kingdom, and the USA.

For more information about Indium Corporation, visit www.indium.com

Share

Print


Suggested Items

Solder Mask Evolves into a Truly Additive Process

09/09/2019 | John Fix, Taiyo America Inc.
The 5G era is creating quite a bit of work for many PCB engineers as the materials required to keep up with the speed, frequency, and latency requirements need to be defined and qualified. Solder mask, for example, now becomes a truly additive process. Read on to find out how and why.

Recent Advances in X-ray Technology: SMTA Webinar Recap

08/12/2019 | Pete Starkey, I-Connect007
Technical Editor Pete Starkey recently attended a webinar on advances in X-ray technology and its applications in the electronics industry, as presented by Keith Bryant, Chair of SMTA Europe, on behalf of SMTA India. Here are the highlights of the webinar.

Cadence Design Systems Takes Tensilica to CES Show Floor

04/26/2019 | Nolan Johnson, I-Connect007
While roaming the aisles of CES, I happened across a suite hosted by Cadence Design Systems. It wasn’t a booth—just a quiet presence behind walls with demonstration hardware inside. Vic Markarian, senior group director for worldwide IP licensing and sales, explains why Cadence was at CES.



Copyright © 2019 I-Connect007. All rights reserved.