optical control to Exhibit in Two Booths at JPCA Tokyo

Reading time ( words)

optical control GmbH & Co. KG is pleased to announce that it will exhibit at JPCA Tokyo, scheduled to take place June 5-7, 2019 at the Tokyo Big Site. The company will demonstrate the OC-SCAN CCX.3 component counter with automatic loading/unloading and offline station in the Alpha and Yamaha booths.

The CCX X-ray offers high speed combined with the best accuracy, and is capable of providing an ROI faster than any other machine on the market. The highlight of the CCX is – there are no libraries required or need for customer input to get started. It is as simple as plugging in the machine, and start counting. It is a true plug-and-play system that can X-ray ANY size reel in the same cycle time no matter type of component, or how full or empty it is.

The machine also can be configured for complete automation, including integrations into other sytems such as automated storage units. Whether this is done by software only, using a loading and unloading unit, or complete integration, is up to the customer in their steps toward industry 4.0.

About optical control GmbH

optical control Americas is part of the Elsysko group, sister of elektron systeme, a full-service EMS company,  in Weißenohe, Bavaria Germany and has 180 employees, four SMT lines, and two throughole lines. The company was founded in 2009 and in 2011, optical control GmbH was formed as a sales and service organization for the CCX (component counter X-ray) products. In 2017, optical control Americas was started.



Suggested Items

Current Megatrends You Pay the Most Attention To

03/20/2019 | I-Connect007 Research Team
In our recent survey, we asked the following question: "What current megatrends do you pay the most attention to?" Below are some of the replies, edited slightly for clarity.

Two Full CFX Demo Lines at IPC APEX EXPO 2019

03/05/2019 | Dan Feinberg, Technology Editor, I-Connect007
During IPC APEX EXPO, Editor Dan Feinberg spoke with David Bergman, IPC VP of standards and technology, about CFX, IPC’s Connected Factory Exchange software for machine-to-machine communication. With more than companies now supporting CFX, IPC set up two full lines for demonstration at the show.

RTW IPC APEX EXPO 2019: Making Components Count

02/25/2019 | Real Time with...IPC
VJ Electronix is filling the void in pre-build component count verification challenges. Don Naugler, president and general manager, sits down with Guest Editor Kelly Dack to explain details of the machine, how it works, and who benefits from it.

Copyright © 2019 I-Connect007. All rights reserved.